URCERI Rotary Tool Kit Bedienungsanleitung Seite 6

• Store idle tools out of the reach of children and do not allow persons
unfamiliar with the tool or these instructions to operate the tool. Power
tools are dangerous in the hands of untrained users.
• Maintain tools. Check for misalignment or binding of moving parts,
breakage of parts and any other condition that may affect the tool's
operation. If damaged, have the tool repaired before use. Many accidents
are caused by poorly maintained tools.
5) SERVICE
Have your tool serviced by a qualified repair person using only identical
replacement parts. This will ensure that the safety of the tool is maintained.
6) SAFETY INSTRUCTIONS RELATED SPECIFICALLY TO THE
EQUIPMENT
1. Please turn off the product immediately after use.
2. When you are using accessories that are not included in the package, you
need to compare the maximum acceptable RPM of the accessory with the
RPM of the tool.
3. Switch off the tool immediately if electrical or mechanical malfunctions
occur.
4. Make sure that you will not accidentally start the tool when installing
accessories.
5. Never use grinding wheels over 1" (25.4mm) in diameter.
6. Never use the shaft lock button when the product is turned on.
7. Never use drill bits over 1/8" (3.2mm) in diameter.
8. Ensure that the size of the accessory fits the size of collet.
9. Charge the tool only with the supplied charger.
10. Do not disassemble the product.
11. This product is not waterproof. Do not expose it to rain or water.
12. This product is for indoor use only. Never charge the unit outdoor.
13. Do not charge the product continuously for more than 10 hours.
EN-3