URCERI Rotary Tool Kit Bedienungsanleitung Seite 5

under the influence of drugs, alcohol or medication. A moment of
inattention while operating tools may result in serious personal injury.
• Use personal protective equipment. Always wear eye protection.
Protective equipment such as dust mask, non-skid safety shoes, hard hat,
or hearing protection used for appropriate conditions will reduce personal
injuries.
• Prevent unintentional starting. Ensure the switch is in the off-position
before connecting to power source and/or battery pack, picking up or
carrying the tool.
• Carrying tools with your finger on the switch or energising tools that have
the switch on invites accidents.
• Remove any adjusting key or wrench before turning the tool on. A wrench
or a key left attached to a rotating part of the tool may result in personal
injury.
• Do not overreach. Keep proper footing and balance at all times. This
enables better control of the tool in unexpected situations.
• Dress properly. Do not wear loose clothing or jewellery. Keep your hair,
clothing and gloves away from moving parts. Loose clothes, jewellery or
long hair can be caught in moving parts.
• If devices are provided for the connection of dust extraction and collection
facilities, ensure these are connected and properly used. Use of dust
collection can reduce dust- related hazards.
4) TOOL USE AND CARE
• Do not force the tool. Use the correct tool for your application. The correct
tool will do the job better and safer at the rate for which it was designed.
• Do not use the tool if the switch does not turn it on and off. Any tool that
cannot be controlled with the switch is dangerous and must be repaired.
• Disconnect the plug from the power source and/or the battery pack from
the tool before making any adjustments, changing accessories, or storing
tools.Such preventive safety measures reduce the risk of starting the tool
accidentally.
EN-2