Product Description; Operating Principal - Jaga OXRE.015 Installationsanleitung

4. PRODUCT DESCRIPTION
4.1. OPERATING PRINCIPAL
The Jaga Oxygen Refresh Units can be installed separately (Stand Alone) or integrated into Low
H2O radiators (Build In). There is a choice of five different controls, each with their own applications.
Independent of the chosen control, a Refresh Unit has the feature that allows fresh air to be directly
brought into the pertinent room. Coupling the simple connection of the unit to the outdoors air pro-
vides the most efficient manner of working. This results in very low RPMs of the ventilator as well as
for a low noise level and low power consumption. If the Refresh Unit is installed in a Low H2O radiator
and the heating is turned on, the fresh/clean air will be mixed with the warm air. This provides the ide-
al level of comfort. The supply of fresh/clean air is suitable for dry or habitable rooms, such as living
rooms, bedrooms, playrooms, study rooms, office spaces, etc.
By supplying this product with different controls, Jaga provides you with the choice between:
– a manual control with a five-position touch control.
– a BMS control (Building Management System) or home automation using a 0 to 10 V signal.
– a combination of a BMS control and a manual control (0 to 10 V plus touch control).
– an automatic control where the ventilation level is regulated using CO2 measurements.
– a SLAVE control that is regulated by a MASTER unit.
76