Occhio Piu alto pro Montageanleitung Seite 48

Installation Più alto
Push the plug connection back
into the interior of the box.
Press and hold the push-button on
the fastening plate.
Position the fastening plate cen-
trally over the spacing box and
snap it into place on the box so
that it is flush.
Continue to hold the spotlight
firmly.
Once the push-button pops out
and is flush with the surface and
the fastening plate is flush with
the spacing box, check that the
spotlight is fixed firmly in place by
turning/pulling it (see illustration
below). Do not let go of the spot-
light until you have checked this.
If the push-button does not pop
out, press the fastening plate
flush onto the spacing box until
the catch mechanism catches.
Never let go of the spotlight while
carrying out this step.
48