Occhio Piu alto pro Montageanleitung Seite 46

Installation Più alto
LED connection cable with plug
connection from the driver
46
Driver (external)
230V AC
mains cable
Connecting the driver (see driver
mounting instructions): Connect
the driver to the mains cable in ac-
cordance with the diagram. Guide
the LED connection cable through
the hollow ceiling/plastering box.
Connect the cable ends to the
driver. Ensure that the positive
pole is identified correctly. Observe
the technical instructions of the
particular manufacturer.
Correct polarity must be observed.
Black cable = positive pole
White cable = negative pole
Screw the spacing box directly
onto the hollow ceiling/plastering
box. As you do so, guide the plug
connector of the LED connection
cable through the opening.
Caution!
Before fitting, disconnect all
current-carrying lines from the
mains supply.