Usb Operation; Setting Clock And Alarm - auna Scala VCD Handbuch

USB OPERATION

During USB Player mode, Press Select NAVIGATE or use the
buttons on the remote control to button to select USB playback and press
OK button to confirm.
Press Select NAVIGATE or use the
to button to select and press ENTER to confirm a MP3/WMA file
Press to pause the track that is currently playing. If you have paused a track,
press to resume playback.
⏯
Press to pause the track that is currently playing. If you have
paused a track, press to resume playback.
Press to play the previous track. Press and hold to rewind the

track that is currently playing.
Press to skip to the next track. Press and hold to fast forward

the track that is currently playing.
Notes
• The unit can only play MP3 and WMA le formats in USB operation.
• This unit supports USB version 2.0 and 3.0.
• The unit can support USB devices with up to 32GB of memory.
• The unit may not compatible with all USB devices; this is not an
indication of a problem of the unit.

SETTING CLOCK AND ALARM

Setting an alarm
1. Press and hold the Menu button on main unit or remote control and turn
and press the Select dial to select 'Main Menu'.
2. Press Select to turn 'Alarm' to 'On'.
3. Turn and press the Select dial to change the 'Frequency'.
4. Select 'Wake Up time' by turning and pressing the Select dial, turn the
dial to adjust the hours and minutes, pressing Select to confirm each
section.
5. Turn and press the Select dial to select 'Source'. Turn and press the
Select dial to choose between 'Digital Radio', 'FM', 'CD' or 'USB', then
press the Select dial to confirm.
6. If you've chosen 'Digital Radio' or 'FM' radio, turn and press the Select
dial to select 'Preset'. To play the station you last listened to, turn and
∨ ∧
Select buttons on the remote control
∨ ∧
Select
EN
53