Manual
VoiceBridge Set BT
Applicable for
111-020-04-300-00
VoiceBridge Bluetooth
Installation Diagram
Staff
Customer
Input: 100~240V AC, 50/60 Hz
Output: 12V DC, 1A
Installation and setting
Step 1. Tear off the protection paper on the back of the unit,
and then put the device to the right position (as close as possi-
ble to the speaker) and press it tightly.
Step 2. Connect the external unit to the power supply and plug it
in.
Customer
This product supports all CE-
marking criteria. The declaration
of conformity certificate can be
obtained from WHD.
Operation
Thank you for buying our VoiceBridge Bluetooth Intercom Kit with headset.
Please read this manual carefully, especially the safety and security information.
Step 3. As the supplied headset has to be paired with the exter-
nal unit already at factory, the headset is ready for use after be-
ing turned on. A double press of the button mutes the micro-
phone or switches it on again and an acoustic feedback sounds.
The volume can be adjusted using the "+/- buttons" on the
headset.
Notes:
Please charge the headset at least one time every 2
months when you don't use it.
Plug charging cable for charging.
Step 4. If other Bluetooth headset has to be paired with the
external unit, long press the Bluetooth key at the external unit
and it will be in pairing status as the blue LED flashes fast.
After the new Bluetooth device is found and connected, the blue
LED will be constant on an the green LED will be off.
Note:
Totally 7 extra Bluetooth headsets can be paired an for auto-
matic re-connections.
WHD are members of the INTERSEROH association.
We participate in the dual system as well as other
industry-specific solutions. Therefore, plastic, metal
and electronic parts can all be recycled.
Step 5. Adjust the volume of the devices with a mini Phillips
screwdriver when necessary.
Note: the volume of the devices has been adjusted before leaving
the factory.
Note:
The external unit for the customer comes with an included infra-
red sensor that activates the microphone, if a person at a distance
from about 80-100 cm is detected.
Contents of package
WHD - Wilhelm Huber+Söhne GmbH+Co.KG
Bismarckstr. 19
D-78652 Deißlingen
Support +49 74 20 / 8 89-800
Fax +49 74 20 / 8 89-51
Version
(Technical and optical
modifications reserved)
22.10.2020
- Page 2 -
E-Mail:
info@whd.de
Web:
www.whd.de