Emerio AC-123282 Bedienungsanleitung Seite 7

Remote control
1. On/off button
2. Mode button
3. Wind speed button
4. Swing button
5. Cool button
6. Timer button
This unit has a remote control. One piece of CR2025 battery will be provided with the remote control. Before
starting to use the remote control, remove the plastic protection from the battery. If you want to change the
battery, please refer to the instruction behind the remote control. If it is not in use for a long time, please take
the battery out of the remote control. Keep button cell batteries out of reach of small children. The functions
of the remote control buttons are the same as the functions of the buttons on the control panel.
During use, align the remote control to the control panel (the remote control receiver is on the control panel);
the remote control will not work if the control panel is blocked.
BEFORE USE
1. Pull the appliance out from the carton and place it on a solid heat-resistant horizontal surface.
2. Check if the accessories are complete including: two ice boxes, one remote control and four wheels.
3. Insert four wheels into the corner holes and ensure the wheels are assembled tightly.
HOW TO USE
1. Turn the water tank lock to the horizontal position. Pull out the water tank slowly to leave 1/3 of the water
tank in the appliance body. Add water into the water tank. If you need the air sent out much cooler, put
the ice boxes (add water and freeze first) into the water. Make sure the water level is between the MIN
and MAX line. Check the water level from the water level window in the front side of the appliance.
Important! Use of the ice boxes:
Add water into the ice boxes; do not exceed the MAX line on the ice box when adding water into it. Screw
the cap tightly to make sure there is no leakage of water droplet. Keep the ice boxes away from children to
prevent ingestion. Freeze the ice boxes by placing them horizontally instead of standing vertically in the
freezer to avoid deformation.
Warning: the water level of the water tank must be less than "MAX" after the ice boxes are put into the
water tank.
2. Plug the appliance into the appropriate power outlet. A beep sound will be heard and the indicator light of
power will be on. The appliance is in standby mode.
3. On/off button:
Press the on/off button to start the appliance. The appliance will work at low wind speed in normal mode
and the corresponding indicator lights will be on.
Press the button again to turn off the appliance. The appliance will enter into standby mode.
4. Wind speed button:
Press the wind speed button to adjust the wind speed: "Low" = low wind speed; "Mid" = medium wind
speed; "High" = high wind speed. The corresponding indicator light will be on.
5. Swing button:
Press the swing button to turn on the swing function. The corresponding indicator light will be on. The air
flow will swing left and right. Press the swing button again to cancel the swing and fix the air flow at a
specific direction horizontally. To adjust the air flow direction vertically, just lift up or press down the
louver outside.
- 6 -