Euphonix MC Mix Bedienungsanleitung Seite 6

2 Common Tasks
If you completed the steps in Section 1: Installation and Setup, you are ready to start
learning about your MC Mix. We recommend performing these simple tutorials of
common tasks in the order presented.
Fader Strip
1. Press the MC Mix's strip 1 fader SEL key (Figure 2-1).
The corresponding track is selected in your application.
2. Move the MC Mix's strip 1 fader up and down.
You are now controlling the level of your application's first track with your MC Mix. The
display at the top of strip 1 shows track information.
6
3. When the MC Mix is first powered up, the PAN key is lit by default. If it is not press the PAN
key (Figure 2-1).
Each strip's Soft Knob now controls pan for its application's corresponding track.
Downloaded from www.Manualslib.com
PAN
key
Figure 2-1 Strip 1 fader SEL key
manuals search engine
CFG CFG
SOLO ON
PAGE PAGE
12
FLIP
CHAN
6
INPUT
INSERTS
0
5
DYN
EQ
10
GROUP
AUX
20
MIX
PAN
30
40
60
Artist Series
professional control surface
fader
SEL key