Herunterladen Inhalt Inhalt Diese Seite drucken

Technical Specifications; Installation - Elektro-Automatik EA 24U Installationsanleitung

Inhaltsverzeichnis

Werbung

DE
Technische Daten
• Typ: EA 24U
• Abm. (BxHxT): 60 cm x ca. 137 cm x 100 cm
• Ausführung: mit Türen, auf Rollen
• AC-Anschluß: L1+L2+L3+PE
• AC-Versorgung: 380 V / 400 V / 480 V (L-L)
• AC-Anschlußstrom: max. 224 A
• Gewicht: ca. 337 kg (voll bestückt)
• DC-Bus: max. 2000 V / max. 4000 A / 120 kW
Konfiguration
• Rollen (4 Stück, feststellbar)
• Mögliche Bestückung:
» 4x PSB 10750-120 oder
» 4x PSB 11000-80 oder
» 4x PSB 11400-60 oder
» 4x PSB 12000-40
• Not-Aus-Kreis installiert mit
» 1x Not-Aus-Schalter (Oberseite)
» 1x Schraubanschluß für ext. Kontakt
» 2x Türkontakt (Hintertür)
• Serial Connection Box (SCB) für Reihenschaltung

Installation

Wichtige Hinweise
• Verändern Sie nicht die Netzeingangs-Verdrahtung
bezüglich Leitungslänge, Absicherung und Quer-
schnitt!
• Der Netzanschluß muß extern abgesichert werden!
1. Schrank aufstellen
Der Schrank wird auf Rollen geliefert. Diese dienen
zum Transport bzw. Ortsveränderung des Schrankes.
Während des Betriebes des Schrankes muß aus Sicher-
heitsgründen sichergestellt sein, daß die Rollen unter
dem Schrank fixiert sind, da sonst der Schrank beginnen
könnte unkontrolliert zu rollen bzw. umzukippen.
Wichtige Hinweise
• Der Schrank darf nur auf horizontalen Flächen
aufgestellt und betrieben werden.
• Der Schrank muß gegen Wegrollen gesichert sein,
neben der Fixierung der vorderen Rollen notfalls
durch weitere Maßnahmen
Be- und Entlüftung
Die Belüftung erfolgt über die Vorderseite (Zuluft) und
Rückseite (Abluft). Die Türen sind luftdurchlässig. Hinter
dem Schrank muß daher mindestens 50 cm Platz ge-
lassen werden. Vorderseite und Rückseite dürfen nicht
durch irgendwelche Gegenstände abgedeckt sein, die
eine Luftzufuhr verhindern könnten.
Installationsanleitung / Installation guide
09114708

Technical specifications

• Type: EA 24U
• Dim (WxHxD): 60 cm x ca. 137 cm x 100 cm
• Model: with rear and front doors, on casters
• AC supply connection: L1+L2+L3+PE
• AC supply voltage: 380 V / 400 V / 480 V (L-L)
• AC current: max. 224 A
• Weight: approx. 337 kg (fully equipped)
• DC-Bus: max. 2000 V / max. 4000 A / 120 kW
Configuration
• Casters (4 pieces, lockable)
• Intended set of devices:
» 4x PSB 10750-120 or
» 4x PSB 11000-80 or
» 4x PSB 11400-60 or
» 4x PSB 12000-40
• Emergency off circuit installed with
» 1x Emergency off switch (on top)
» 1x Screw terminal for external contact
» 2x Door contact (rear door)
• Serial Connection Box (SCB) for series connection
Installation
Important notes
• Do not modify the internal wiring, especially not
regarding cross section and cable length!
• The AC supply has to be fused externally!
1. Cabinet placement
The cabinet is delivered with casters. The casters are
allowed to be used while transporting/moving of the cab-
inet. During operation it must be ensured that the casters
are fixed for safety reasons in order to avoid the cabinet
from rolling off or tipping over.
Important notes
• The cabinet must only be positioned and operated
on horizontal ground
• The cabinet must be secured against rolling off,
either by locking the casters or removing them
Air cooling
Operating the cabinet requires unobstructed air ventila-
tion from the front to the back. The installed doors have
a mesh which allows for sufficient air circulation. Behind
the cabinet it requires to have at least 50 cm of space
for exhausting air. Front and back door must not be ob-
structed in any way.
Datum: 07.05.2020
EN
3

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis