Getting Started - Cleyver Xdive Kurzanleitung

4/ GETTING STARTED

Inserting the SIM card and the memory card (Micro-SD) :
The phone allows you to use 2 SIM cards. During a call, one of the
cards will operate in active mode, while the other will not be available.
► Unscrew the screws and open the rear cover.
► Insert the SIM card into the appropriate slot.
Use a SIM card format in order not to damage the ports.
► Also insert a Micro-SD card, if necessary.
► Insert the battery in the direction of the contacts. Those of the battery
should match the phone contacts.
It is recommended to fully charge the battery before the first use.
► Check that the seal is properly positioned and clean.
► Replace the back cover and tighten the screws completely without
forcing.
20
Xdive
Rechargeable Li-ion Battery
Capacity: 1800 mAh
Restrictive voltage: 4.2 V
Charging voltage: 3.7V
SIM1 SIM2
Micro-SD