Assembly; Operation - Buffalo U626 Bedienungsanleitung

Telephone Helpline: 0845 146 2887

Assembly

The plastic safety guard has been removed from the appliance to prevent damage during transit.
WARNING: The safety guard MUST be fitted before using this appliance .
BUFFALO accept no responsibility for any injury caused by operation of this appliance without the guard
installed or correctly fitted.
Remove the appliance from all packaging.
1.
Attach the safety guard using the two screws and washers supplied, (see below).
2.

Operation

Connect the appliance to the power supply.
1.
Set the thickness to the desired level by turning
2.
the Thickness knob anti-clockwise.
Turn the Plate fixing bolt clockwise so the fixing
3.
head touches the plate.
Note: It is important to set the Plate fixing bolt as failure to do so can result in
inaccurate thicknesses when slicing.
Safety Guard
Carriage
Power indicator
ON switch OFF switch
UK
Slice thickness
knob
2