Important Notice; Safety Precautions - SW Stahl PROFI Tools 26128L Bedienungsanleitung

26128L
COMPONENTS

IMPORTANT NOTICE

The purpose of this use and maintenance manual is to provide useful information but also to avoid risks and
dangers during use. Compliance with the instructions contained in this use and maintenance manual ensures an increase
in useful life and thus a reduction of the hydraulic cylinders repair costs.
1. Visually inspect the product to identify any shipping damage and, if any, promptly notify the shipper. Damage incurred during
shipping is not covered by warranty.
2. SW-STAHL disclaims any liability for damage resulting from product improper use, lack of maintenance or incorrect
application of the product for which it was designed.
WARNING! This equipment is not a lifting device!

2.0 SAFETY PRECAUTIONS

Carefully read all instructions, warnings and precautions.
During system operation, observe all safety regulations to avoid injury or equipment damage. In case of doubt
regarding safety or applications, contact SW-STAHL. Failure to observe these precautions could result in serious
equipment damage and personal injury.
1. PRECAUTION: indicates correct operating or maintenance procedures to avoid damage to the equipment or to the
surrounding environment:
•
Always check the integrity of the accessories connected to the cylinder as: tube, couplers, pressure gauge, pump, etc..;
•
Avoid bending and rolling the hose during use, it could be irreparably damaged inside or create pressure fluctuations during
operation;
•
Do not drop heavy loads on the hose and prevent crushing of any kind such as to compromise the integrity of the metal
reinforcement inside the hose;
•
Never lift the cylinder by the hose or by the coupler, but by the body where it is fixed;
•
Keep the hydraulic equipment away from flames, heat sources and sparks;
•
Do not use the cylinder out of the temperature range indicated in Table A ;
•
Be sure to use hydraulic fluid compatible with the gaskets mounted in the cylinder, see operating temperatures and
viscosities in Table A ;
• Keep the coupler (quick-connect coupling) clean and close with a special cap every time the hose is disconnected.
6
26128L
5
5