Technical Data; Special Safety Instructions; Inserting The Batteries - Dangrill 751835 Gebrauchsanweisung

WIRELESS MEAT THERMOMETER
Introduction
To get the most out of your new meat
thermometer, please read this instruction
manual before use. Please also save the
instructions in case you need to refer to
them at a later date.

Technical data

GB
Power supply, meat thermometer:
Power supply, receiver:
Range:
Temperature range:
Display:
current temperature, target temperature
Measurement unit:
With background light
The meat thermometer has a magnet and
the receiver has a clip
18
2 × 1.5 V AA batteries
2 × 1.5 V AAA batteries
60 metres (without obstacles)
Meat type, doneness,

Special safety instructions

The probe and cord may only be used at
temperatures below 250 °C. Never place the
probe or cord under the grill or in the oven
if the actual temperature is above 250 °C!
Note! As the meat thermometer uses a � xed
frequency between the transmitter and
receiver, only one meat thermometer can
be used at a time within the transmitter's
and receiver's range.

Inserting the batteries

• Remove the battery cover from the
meat thermometer. Insert 2 new 1.5
V AA batteries. Align the batteries
0-250 °C
correctly, as shown in the battery
compartments. Replace the battery
cover.
°C/°F
• When you insert the batteries, a beep
will be heard and all the segments will
be shown brie� y in the display The meat
thermometer is now ready for use.
• Remove the battery cover from the
receiver. Insert 2 new 1.5 V AAA
batteries. Align the batteries correctly,
as shown in the battery compartments.
Replace the battery cover.