Principal Of Operation; Applications; Precautions - Mityvac MV6400 Benutzerhandbuch

prinCipal of operation

This equipment is designed and intended for use
as a means to dispense fluid. It utilizes a manual
pressure pump to build pressure in the reservoir.
The pressure forces fluid to dispense out of the
reservoir through a fluid pickup tube. The output
of the fluid pickup tube is connected to a quick-
change coupler, to which a variety of accessories
can be attached to control or direct the flow of
fluid according to the intended application.
The equipment should never be operated above a
safe level of pressure depending on the applica-
tion. A gauge is installed to indicate the pressure
in the reservoir, and should be observed regularly
to ensure the pressure remains at or below what is
recommended for the application.

applications

This equipment is intended for filling reservoirs
with fluids such as engine coolant, motor oil, or
wiper, automatic transmission, brake or power
steering fluid. However, with the proper acces-
sories it can safely be used to pressure bleed hy-
draulic brake or clutch systems, or refill or top-off
sealed automatic transmissions.

precautions

This equipment is designed for servicing a variety
of vehicles in a safe, convenient manner. How-
ever, differences in vehicle makes and models
may make it impossible to use this equipment as
it is intended. Do not attempt to force the use of
this equipment on an application for which it is not
designed to perform.
The procedures documented in this manual are to
serve as guidelines for the use of this equipment.
In addition to these guidelines, always follow the
manufacturer's recommended procedures when
servicing each unique vehicle.
The use of this equipment is simple and straight-
forward if you follow the instructions. However,
always keep in mind that you are working with a
system that may be under pressure, with fluid that
is just waiting to be expelled. When operating
this equipment, use common sense, and always
stop to think before disconnecting a hose or other
component.
Page Number - 4
All manuals and user guides at all-guides.com
• This equipment is intended only for professional
• Read carefully and understand all instructions
• Always wear eye protection and proper clothing
• Do not attempt to modify the pressure relief
• Some fluids, including brake fluid, are corrosive,
• Do not use this equipment with gasoline or other
• Consult and follow the vehicle manufacturer's
use by personnel trained in performing the ser-
vice functions for which it is has been designed.
prior to using this equipment.
when operating this equipment
valve to alter its performance. If pressure in the
reservoir ever exceeds 23 psi (1.6 bar), return
it to an authorized service center for repair or
replacement.
and proper care should be taken to protect
painted surfaces and skin from exposure.
flammable liquids, or with fluids at temperatures
above 175° Fahrenheit (80° Celsius).
recommended procedure when using this
equipment to perform automotive service.
Form 801193