JVD RB9385 Gebrauchsanweisung Seite 20

temperature digit would display.
 Active outdoor lower temperature alert, icon "
display.
 Deactivate outdoor temperature alert, alert icon disappear.
Hold "ALERT" button for 3 seconds to enter outdoor temperature alert setting. Icon "
⚫
beside Temperature's digits flash. Press "▲" or "▼"button to adjust the setting value, press
"ALERT" to confirm the setting. Setting Sequence as follow: Upper limit of temperature, Lower
limit of Temperature.
When it's alert, the corresponding icon "
⚫
LCD. Press any buttons to stop the alert sound
9. Low battery indication:
The low battery icon "
thermo sensor in low battery status. The batteries should be replaced.
10. Precautions
Use a pin to press the reset button (B4) if the Unit does not work properly.
⚫
All setting modes will automatically exit in 15 seconds without any adjustment.
⚫
The clock loses its time information when the battery is removed.
⚫
Avoid placing the clock near interference sources/metal frames such as computer or TV sets.
⚫
Do not expose it to direct sunlight, heavy heat, cold, high humidity or wet areas
⚫
The outdoor sensor must not be set up and installed under water. Set it up away direct sunlight and
⚫
rain
Never clean the device using abrasive or corrosive materials or products. Abrasive cleaning agents
⚫
may scratch plastic parts and corrode electronic circuits.
" or "
" turns on the display (beside the outdoor temperature), indicating that
" besides outdoor temperature digit would
" and temperature digit would flash on the
" or " "