Remote Control; Bluetooth Operation - Sharp HT-SB106 Schnellstartanleitung

ENGLISH
Before using your product, read all safety instructions. For full instructions please refer to the
user guide available to download from the website sharpconsumer.eu.
1) Getting started - initial set up
1. Use the inputs on the rear panel of the
soundbar to connect external audio
and video devices equipped with the
corresponding outputs (Pic. 1). You will
achieve the best sound quality by using
the digital inputs OPTICAL and HDMI.
Caution! Turn all devices off and disconnect
them from the power supply before starting
any connection.
2. Connect the power adapter to the DC
IN socket of the unit and then into a
mains socket.
3. Insert the battery into the remote
control.
4. Press the button on the remote
control to switch the main unit ON
or OFF.
5. Press the button on the unit
repeatedly or press the
on the remote control to select the
desired mode.

2) Remote control

1. – Switch the unit between ON and
STANDBY mode.
2. – Select the Bluetooth mode.
Press and hold to activate the pairing
function in Bluetooth mode or dis-
connect the existing paired Bluetooth
device.
3. – Select the play function.
4. VOL +/- – Increase/decrease the
volume level.
5. / – Skip to previous/next track in
Bluetooth/USB mode.
6. – Play/pause/resume playback in
Bluetooth/USB mode.
7. – (MUTE) Mute or resume the sound.
8. BASS +/- – Adjust bass level.
9. TRE +/- – Adjust treble level.
10. EQ – Select a preset sound mode.
3) Side controls on soundbar
1. button
Switch the unit between ON and
STANDBY mode.
2.
Select the source.
3. +/- buttons
Increase/decrease the volume level.

Bluetooth Operation

Pair Bluetooth-enabled Devices
The fi rst time you connect your Bluetooth
device to this player, you need to pair your
device to this player.
1. Turn on the soundbar by pressing the
standby button.
2. Press the
repeatedly or button on the remote
control to select the Bluetooth mode.
You are in Bluetooth mode when the
/ buttons
blue Bluetooth indicator fl ashes quickly.
3. Enter the Bluetooth search mode on
the device you wish to connect to the
soundbar.
4. Select SHARP HT-SB106 from the list
5. Enter password "0000", if required.
6. Your device and the soundbar will now
be connected; the blue indicator will
stop fl ashing.
7. Begin playing music from the connected
Bluetooth device.
button
button on the unit
3