Troubleshooting - Kasanova PRO MY-CS600 4WPB Bedienungsanleitung

ELECTRIC PRESSURE COOKER
washing, timely and correctly install them after washing, and then
dry the internal side of lid with cloth.
5. Wipe clean the cooker body with a rag, and it is prohibited to
soak the cooker body in water or spray water to it.
ELECTRICAL SCHEMATIC DIAGRAM

TROUBLESHOOTING

When followings occur, it is not the cooker fault, please carefully check
once before sending it for repair.
S/N Problem
1 Difficult to close the lid
2 Difficult to open the lid
3 Steam leaks from the lid
Reason
Sealing ring not installed
properly
The floater valve clamps the
push rod
Float valve in the popped-up
position
Pressure exists inside the
cooker
Sealing ring installed
improperly
Food debris attached to the
sealing
Sealing ring damaged
The lid is not closed
correctly
Solution
Position the sealing ring well
Lightly push the push rod
Press the float valve lightly with a
chopstick.
Open the lid after the pressure is
completely released.
Install the sealing ring as required
Clean the sealing ring
Replace the sealing ring
Close the lid correctly
51