Werbung
Verfügbare Sprachen
Verfügbare Sprachen
USER'S MANUAL
TIE-CLIP MICROPHONE
Tie-clip microphone for TM-105
LS-105
The tie-clip microphone
was designed for vocal sound- and speech
applications which require hands-free operation and is ideally suited for use with the
TM-105
multifrequency transmitter
, which is a component of the PA system
W.A.M.S.-05
.
Cardiodid electret condenser microphone suitable for multifrequency transmitter
TM-105
For voice pickup for vocal sound- and speech applications
Particularly suitable for applications requiring hands-free operation, such as
aerobics, acting or percussion
For attaching to the user's tie, shirt or collar
Connection with the pocket transmitter via 3.5 mm mini jack
Delivery includes windshield
Safety Instructions
The microphone was designed for indoor use only. Protect the device against humidity
and heat (permitted ambient temperature range 0-40°).
Maintenance and service operations are only to be carried out by authorized dealers.
Damage, caused by manual modifications on the microphone is not subject to warranty.
If the microphone is used for other purposes than originally intended or if it is not
correctly connected, the product may suffer damage and the guarantee becomes void.
Cleaning and Maintenance
For cleaning the microphones only use a soft lint-free and moistened cloth. Make sure
not to allow any water to enter the device and never use any solvent cleansers.
Setting into Operation
Plug the 3.5 mm jack plug of the microphone connection cable into the MIC jack of
TM-105
the pocket transmitter
.
Attach the microphone to your clothes (e.g. tie, shirt or collar) via ist clip.
If necessary, place the supplied windscreen on the microphone.
Technical Specifications
Type: .........................................Back electret condenser
Directivity pattern: ......................Cardioid
Frequency response:.................80-18,000 Hz
Sensitivity: .................................-66 dB (± 3 dB)
Impedance: ...............................600 Ohm (± 30 %)
Power supply: ............................1.5 V - 10 V DC
Connection: ...............................3.5 mm stereo mini jack plug
Cable length: .............................1 m
Weight: ......................................20 g
Please note: Every information is subject to change without prior notice. 26.11.2007 ©
© Copyright
Nachdruck verboten!
Reproduction prohibited!
13056002_V_1_0.DOC
www.omnitronic.com
USER'S MANUAL
TIE-CLIP MICROPHONE
Tie-clip microphone for TM-105
LS-105
The tie-clip microphone
was designed for vocal sound- and speech
applications which require hands-free operation and is ideally suited for use with the
TM-105
multifrequency transmitter
, which is a component of the PA system
W.A.M.S.-05
.
Cardiodid electret condenser microphone suitable for multifrequency transmitter
TM-105
For voice pickup for vocal sound- and speech applications
Particularly suitable for applications requiring hands-free operation, such as
aerobics, acting or percussion
For attaching to the user's tie, shirt or collar
Connection with the pocket transmitter via 3.5 mm mini jack
Delivery includes windshield
Safety Instructions
The microphone was designed for indoor use only. Protect the device against humidity
and heat (permitted ambient temperature range 0-40°).
Maintenance and service operations are only to be carried out by authorized dealers.
Damage, caused by manual modifications on the microphone is not subject to warranty.
If the microphone is used for other purposes than originally intended or if it is not
correctly connected, the product may suffer damage and the guarantee becomes void.
Cleaning and Maintenance
For cleaning the microphones only use a soft lint-free and moistened cloth. Make sure
not to allow any water to enter the device and never use any solvent cleansers.
Setting into Operation
Plug the 3.5 mm jack plug of the microphone connection cable into the MIC jack of
TM-105
the pocket transmitter
.
Attach the microphone to your clothes (e.g. tie, shirt or collar) via ist clip.
If necessary, place the supplied windscreen on the microphone.
Technical Specifications
Type: .........................................Back electret condenser
Directivity pattern: ......................Cardioid
Frequency response:.................80-18,000 Hz
Sensitivity: .................................-66 dB (± 3 dB)
Impedance: ...............................600 Ohm (± 30 %)
Power supply: ............................1.5 V - 10 V DC
Connection: ...............................3.5 mm stereo mini jack plug
Cable length: .............................1 m
Weight: ......................................20 g
Please note: Every information is subject to change without prior notice. 26.11.2007 ©
© Copyright
Nachdruck verboten!
Reproduction prohibited!
13056002_V_1_0.DOC
www.omnitronic.com
Werbung
