Adjusting Your Rubber Strap - Doxa SUB 200 Bedienungsanleitung

ADJUSTING YOUR RUBBER STRAP

1.
Detach the clasp from the strap
by removing the spring bar at the end
of each half of the strap.
Example 1:
Even overlap with 6 holes.
6 divided by 2 equals 3, plus 1 hole at
each end, equals 5. Trim both halves
at the 5 hole.
th
20
2.
For the proper strap length, overlap
both halves around your wrist. Count the
number of holes and divide by 2. Add
1 hole at each end for the clasp. You now
have the correct length to trim to.
Example 2:
Odd overlap with 5 holes.
5 divided by 2 equals 2.5, plus 1 hole at
each end, equals 4.5. Trim at the 5
on the 12 o'clock half, and at the 4
on the 6 o'clock half.
hole
th
hole
th