Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Operating Instructions
Magnetic Smartphone CD-Slot Mount
Item No. 1647038
Intended Use
Use this device to magnetically attach your smartphone to a CD slot. The rotating ball joint can
be adjusted 360° to optimize viewing angle, and the locking screw will hold the device firmly
in place. Rubberised mounting points protect the CD slot from damage and the included metal
plates allow you to mount with or without a smartphone case.
For safety and approval purposes, you must not rebuild and/or modify this product. If you use
the product for purposes other than those described above, the product may be damaged. In
addition, improper use can result in short circuits, fires, or other hazards. Read the instructions
carefully and store them in a safe place. Make this product available to third parties only
together with its operating instructions.
This product complies with the statutory national and European requirements. All company
names and product names are trademarks of their respective owners. All rights reserved.
Delivery Content
• Device
• 2 x metal plates (inner and outer)
Up-to-date Operating Instructions
Download the latest operating instructions at www.conrad.com/downloads or
scan the QR code shown. Follow the instructions on the website.
Explanation of Symbols
The symbol with the exclamation mark in the triangle is used to indicate important
information in these operating instructions. Always read this information carefully.
The arrow symbol indicates special information and advice on operation.
Safety Instructions
Read the operating instructions carefully and especially observe the safety
information. If you do not follow the safety instructions and information on
proper handling in this manual, we assume no liability for any resulting
personal injury or damage to property. Such cases will invalidate the warranty/
guarantee.
• The device is not a toy. Keep it out of the reach of children and pets.
• Do not leave packaging material lying around carelessly. This may become
dangerous playing material for children.
• Protect the appliance from extreme temperatures, direct sunlight, strong jolts, high
humidity, moisture, flammable gases, steam and solvents.
• Do not place the product under any mechanical stress.
• If it is no longer possible to operate the product safely, take it out of operation and
protect it from any accidental use. Safe operation can no longer be guaranteed
if the product:
- is visibly damaged,
- is no longer working properly,
- has been stored for extended periods in poor ambient conditions or
- has been subjected to any serious transport-related stresses.
• Please handle the product carefully. Jolts, impacts or a fall even from a low height
can damage the product.
• Consult the instruction manual of the CD player in regard to installation of such
products before installing.
• Consult an expert when in doubt about the operation, safety or connection of the
appliance.
• Maintenance, modifications and repairs must only be completed by a technician
or an authorised repair centre.
• If you have questions which remain unanswered by these operating instructions,
contact our technical support service or other technical personnel.
Operating Elements
1
2
3
• Protective film
• Operating instructions
1 Rotating ball joint (360°)
2 Rubberized magnetic head
4
3 Locking screw
4 Slot connector
Operation
The metal plates may get magnetized to some extent during use.Users that carry a
pacemaker are strongly requested to discuss the use of the product with their doctor
first. The metal plates may especially pause a risk when carrying the phone in the
pocket of a shirt or jacket.
a) Outer Metal Plate
If you are not using a case, attach this directly to your smartphone. Attach it to the
outside of your case if you are using one.
To protect your smartphone from getting scratched, please use the protective film. It
will not leave any residue when removed.
• Clean chosen surface, making sure to remove all lint,
dust and dirt.
• Unpeel the protective film cover, place on desired
surface (recommended).
• Unpeel the outer metal plate cover, attach the plate to
the outside of your device or case at desired location.
b) Inner Metal Plate
If you are using a thick case, use the outer metal plate and connect it to the outside
of your case.
• Clean chosen surface, making sure to remove all lint, dust and
dirt.
• Unpeel protective film cover, place on desired surface
(optional).
• Unpeel the inner plate cover then attach the plate to the inside
surface of your phone case.
c) Slot Mount
• Insert the slot connector (4) into CD slot then tighten the locking screw (3) to hold in place.
Do not over-tighten the locking screw (3) as this may damage the CD slot. Also note
that your CD player may not support the max weight of your phone. Your CD player
instruction manual may have more information about this.
Maximum weight of phone, see technical data.
d) Attaching Phone
• Place your phone onto the holder, making contact between the rubberized magnetic head (2)
and the metal plate. Max. phone weight, see technical data.
Make sure your phone is held firmly in place before letting go.
Care and Cleaning
• Do not use any aggressive cleaning agents, rubbing alcohol or other chemical solutions as
they can cause damage to the housing and malfunctioning.
• Clean the product with a dry, fibre-free cloth.
Disposal
At the end of its service life, dispose of the product in accordance with applicable
regulatory guidelines.
You thus fulfill your statutory obligations and contribute to the protection of the
environment.
Technical Data
Phone weight ................................ max. 300 g
Dimensions (W x H x D) ............... 82 x 67 x 80 mm
Weight .......................................... 88 g
This is a publication by Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau (www.conrad.com). All rights
including translation reserved. Reproduction by any method, e.g. photocopy, microfilming, or the capture in electronic data
processing systems require the prior written approval by the editor. Reprinting, also in part, is prohibited. This publication
represents the technical status at the time of printing.
Copyright 2018 by Conrad Electronic SE.
*1647038_v1_0318_fl01_02_m_4L(3)
Werbung
