JMA BT SLIM Benutzerhandbuch Seite 9

2. INSTRUCTIONS FOR THE USER
2.1.USAGE IN TRIGGER MODE
To use the trigger mode:
1. Link the remote control to the mobile phone. See the
section LINKING (pg. 11).
2. Press the BT SLIM button to connect it to the mobile
phone.
3. Open the photo camera app on the phone and press the
BT SLIM button to capture a photo.
*Note: If the photo is not captured upon pressing the button when
using an Android device, it may be because the volume button is
not the default option for taking a photo. Go to camera settings and
switch the Volume button option to "Take a Photo".
2.2. OPENING GARAGE DOORS
The code for one or several original garage door openers
must be recorded on the device in order to use BT SLIM as
a remote garage door opener. This recording must be done
using the JMARemotesPRO app. Check with your JMA
distributor for more information.
2.2.1. OPEN A GARAGE DOOR VIA A SMARTPHONE
Once the original garage door opener codes are copied on the
BT SLIM device, follow these steps:
1. Set the remote in "Bluetooth Mode" (See pg. 8).
2. Link the remote control to the mobile phone. See the
section LINKING (pg. 11).
3. Download the JMARemoteSlim app. It has 4 buttons that
can be linked with the original garage door opener codes
saved in BT SLIM. The buttons can be edited with an icon
and text to help identify the place where the door(s) to be
opened is/are located. See Images on the next page (pg. 10).
4. Press the BT SLIM button. Since the garage door opener is
linked, it will automatically connect to the mobile device.
5. Open the JMARemoteSlim app.
6. Press the desired virtual button the screen to send the
garage door opener code.
7. The remote garage door opener will disconnect after 60
seconds of inactivity.
9