Concept MTG5825 Bedienungsanleitung Seite 70

10. Press the START/+30SEC/CONFIRM button to turn on the unit.
11. If you need to interrupt cooking, e.g. so as to stir the food, press the STOP/CLEAR button and open the door. After
closing the door press the START/+30SEC/CONFIRM button - cooking will continue.
Note: If you need to extend the time during cooking, press the START/+30SEC/CONFIRM button as needed.
If you need to stop the current program before the set time elapses, press the STOP/CLEAR button. By pressing this
button again the set time is cleared and the time of day displays.
12. When the cooking time elapses the unit turns off automatically.
13. Open the door and take out the food.
b) Defrosting + cooking
1. Put the food in the oven and close the door.
2. Press the WEIGHT/TIME DEFROST button to turn on the time defrosting function. DEF2 appears on the display.
3. Turn the TIMER/WEIGHT/AUTO MENU button to set the defrosting time within the range from 5 seconds to 95
minutes.
4. Push the MICROWAVE button. The value P100 is displayed.
5. Turn the TIMER/WEIGHT/AUTO MENU button to set the required power within the range from 100% to 10% (P100,
P80, P50, P30, P10).
6. Press the START/+30SEC/CONFIRM button to confirm.
7. Turn the TIMER/WEIGHT/AUTO MENU button to set the required time of cooking within the range from 5 seconds to
95 minutes.
8. Press the START/+30SEC/CONFIRM button to turn on the unit.
9. Approximately halfway through the defrosting time turn the food over and press the START/+30SEC/CONFIRM
button to continue in the program.
10. If you need to interrupt cooking, e.g. so as to stir the food, press the STOP/CLEAR button and open the door. After
closing the door press the START/+30SEC/CONFIRM button - cooking will continue.
Note: If you need to extend the time during cooking, press the START/+30SEC/CONFIRM button as needed.
If you need to stop the current program before the set time elapses, press the STOP/CLEAR button. By pressing this
button again the set time is cleared and the time of day displays.
11. When the cooking time elapses the unit turns off automatically.
12. Open the door and take out the food.
Delayed Start function
1. Select the required program of cooking or defrosting and set its power and time or the weight of the food. You can
also select 2 phases of cooking.
2. Do not start the program!
3. Press the CLOCK/PRE-SET button.
4. Turn the TIMER/WEIGHT/AUTO MENU button to set the hour of starting.
5. Press the CLOCK/PRE-SET button.
6. Turn the TIMER/WEIGHT/AUTO MENU button to set the minutes of starting.
7. Press the CLOCK/PRE-SET button to confirm. Symbol ":" starts blinking.
Note: Pressing the CLOCK/PRE-SET button during cooking displays the time of day for 5 seconds.
8. Press the CLOCK/PRE-SET button.
9. Turn the TIMER/WEIGHT/AUTO MENU button to set the required hour of the start of the program.
10. Press the CLOCK/PRE-SET button.
11. Turn the TIMER/WEIGHT/AUTO MENU button to set the required minutes of the start of the program.
12. Press the START/+30SEC/CONFIRM button to start the countdown.
Note: Before starting the program the time of day must be set. Before starting the program always make sure that
there is food in the oven. This function cannot be used for defrosting.
68
EN
MTG5825