Structure Ecostock 200-1000 (Z16501Mb Up To Z16518Mc) - WATERKOTTE EcoStock Serie Betriebsanleitung

Design and technology
3.4

Structure EcoStock 200-1000 (Z16501MB up to Z16518MC)

Special version: Storage tank with heat exchanger for connection to gas, oil or solar.
Figure 3-3: EcoStock 200-500
Connections Ecostock 200-500
Upper ventilation
Sensor/thermometer
WT2
Hot water / heating flow
Electrical heating cartridge
E
(otion)
Anode
Upper anode
Sensor/thermometer
Flange Lower flange
Z Circulation
2)
PV Heating flow
4)
Tr Sensor/thermometer
2)
PR Heating return
WP1 HP-> tank (IN)
WP2 Tank (OUT)->HP
WT1 Cold water / heating return
2) Steel enamelled with HE (operation only with solar or additional heater)
22.12.2017
Copyright  2017 by: WATERKOTTE GmbH. Subject to change without notice.
Connections Ecostock 800-1000
1¼" int.
Ø17,2 mm
1¼" int. WT2
1½" int. E
1¼" int. Anode
Ø17,2 mm
Flange
Anode
Ø180 mm Flange
¾"int. Z
2)
1" int. PV
4)
Ø17,2 mm Tr
2)
1" int. PR
1¼" int. WP1
1¼" int. WP2
1¼" int. WT1
4) Hot water sensor connection
24 / 60
Upper ventilation
Sensor/thermometer
Hot water / heating flow
Electrical heating cartridge
(option)
Upper anode
Sensor/thermometer
Flange oben
Mg-Anode unten
Lower flange
Circulation
Heating flow
Sensor/thermometer
Heating return
HP-> tank (IN)
Tank (OUT)->HP
Cold water / heating return
2" int.
Ø17,2mm
2" int.
1½" int.
1¼" int.
Ø17,2 mm
Ø180 mm
1¼" int.
Ø180 mm
¾"int.
1¼" int.
Ø17,2 mm
1¼" int.
2" int.
2" int.
2" int.
Z21339