Connecting The Player - Fantec 4KS7000 Kurzanleitung

CONNECTING THE PLAYER

Please refer to the following recommendation when connecting
the player to your TV set and your network:
Note: Switch off the player and your TV set before connecting the player
to your TV.
Connect to the TV
1
Connect your player and TV with the included HDMI cable.
Alternatively, you can use the AV output of the player with
a suitable, optionally available adapter and connect it to
the AV input of your TV.
Connect to the LAN network
2
Connect your player to your network router.
Use a LAN cable or register the player in your WLAN.
3 Turn on the player
Connect your player to the power adapter.
The player starts automatically when you turn on the power.
Note:
Please set the correct signal source on your TV before you switch on the player.
Either HDMI or A / V.
Tip:
The player also supports Wi-Fi. You will find an icon on the start screen so that
you can coordinate your player with your WLAN.
16