Power Switch - Max PowerLite AKHL1260E Bedienungsanleitung

3. NAME OF PARTS (See Fig.A)
Description of Functions of Key Components

1 Power switch

2 Pressure-Reduction valve adjust-
ment handle (HIGH) (Orange cap)
3 Pressure-Reduction valve adjust-
ment handle (REGULAR) (Yellow
cap)
4 Pressure gauge in the tank
5 Pressure gauge (HIGH)
6 Pressure gauge (REGULAR)
7 High pressure air chuck (for MAX
tools)
8 Regular pressure air chuck (for
regular pressure tools)
9 Drain cock
0 Power plug
a Power cord
b Air tank
c Rubber foot
d Control panel
e Grip for two-handed carry
f Air chuck 44K
g Flexible pipe M-5
h Stop plug
Turns on or off the power supply
Intended for exclusive use with the
the operating pressure of the
Adjusts the pressure supplied to the regular pressure
nailers and pneumatic tools (operating air pressure 8.3
bar (120psi) maximum).
Indicates pressure in the tank. The pressure increases
up to 34 bar (500psi).
It indicates the set pressure on the pressure-reduction
valves (HIGH).
(24.5 bar (335psi) maximum)
It indicates the set pressure on the pressure-reduction
valves (REGULAR). (8.3 bar (120psi) maximum)
It connects the MAX
It connects the air hose for the regular pressure nailers.
It drains compressed air and water, Drain once when the
work is finished or more a day.
It is usable with a triode ground outlet.
It allows switching the mode between Normal and Quiet.
(See Fig.B) For details of the LEDs and switches on the
Control panel, see "Control Panel" on page 16.
• Current consumption is reduced in the operation in
Quiet mode.
It connects the flexible pipe M-5 of lower three tanks.
It connects the upper two tanks and the lower three tanks.
It seals the part to attach the air chuck 44K.
15
tool. It adjusts
tool.
air hose for the tools.