Wellcare WE-167UBAHD Bedienungsanleitung Seite 13

4. Make sure that the electric underblanket is firmly
strapped to the mattress by the elastic bands in
4 corners.
5. Join the detachable plug-in connector (6) to the
connection box (7).
6. Cover the blanket (8) and the mattress with
the bed sheet, make sure again the blanket
is completely flat and the controller (2) is
not covered by the sheet, pillow or any objects.
7. Plug the mains cable (1) to the socket.
8. The blanket (8) should be covered by a duvet,
for example, otherwise there will be a high loss
of heat and the blanket cannot warm up
properly.
Unplug the appliance from the wall socket when it
is no longer in use.
SWITCHING ON
Before each time you use the electric underblanket
(8), please make sure it is not bundled, folded or
creased before it is switched on.
Connect the electric underblanket only to
230VAC. Switch on the underblanket by using
the hand-operated slide switch (4) and there will
be 3 times of beep sound (beep-beep-beep)
to ensure the electric underblanket has been
operated correctly. The warm-up time for this
electric underblanket is 15 minutes approximately.
Temperature settings :
4 = maximum warmth
GB
13