LENCO DIR-250 Bedienungsanleitung Seite 13

Note: WiFi allows data transfer over short distances within 20 meters without the need of
cabling between the devices. Walls and ceilings may reduce WIFI range.
Therefore try to locate the DIR-250 and/or the access point within the distance above and
avoid any obstacles between two devices.
Connect the power adaptor to the mains and plug the DC plug the adaptor into the DC-IN
●
socket of the DIR-250
On first use the DIR-250 will start with the installation wizard. The system will ask you to:
●
1 set Language and Network Configurations (fig 1.)
(use the navigation knob(3) to select)
1
2 Check network availability on power on (fig 2.)
2
3 Configure the wifi network (fig 3.)
3
Select Yes to establish connection to a network
●
13