Herunterladen Diese Seite drucken

Lindy 39392 Benutzerhandbuch Seite 3

300m fibre optic hdmi 18g & usb kvm extender

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

User Manual
Safety Instructions
! WARNING !
Please read the following safety information carefully and always keep this document with
the product.
Failure to follow these precautions can result in serious injuries or death from electric
shock, fire or damage to the product.
Touching the internal components or a damaged cable may cause electric shock, which
may result in death.
To reduce risk of fire, electric shocks or damage:
Do not open the product. There are no user serviceable parts inside.
Qualified servicing personnel must only carry out any repairs or maintenance.
Never use damaged cables.
Do not expose the product to water or places of moisture.
This product is intended for indoor use only.
Do not place the product near direct heat sources. Always place it in a well-ventilated place.
Do not place heavy items on the product or the cables.
Please ensure any adapters are firmly secured and locked in place before inserting into a wall
socket.
Introduction
Thank you for purchasing the 300m Fibre Optic HDMI 18G & USB KVM Extender. This product has been
designed to provide trouble free, reliable operation. It benefits from both a LINDY 2 year warranty and free
lifetime technical support. To ensure correct use, please read this manual carefully and retain it for future
reference.
The Lindy 300m Fibre Optic HDMI 18G & USB KVM Extender is capable of transmitting a highly-detailed
3840x2160@60Hz HDMI signal, USB, bi-directional IR & RS-232, all over a single low cost duplex LC
OM3 multi-mode (50/125µm) fibre optic cable up to 300m (984.24ft). This allows users to control a source
device in a remote location with a KVM console.
Package Contents
Transmitter Unit
Receiver Unit
2 x SFP+ Fibre Modules
IR Emitter Cable
IR Receiver Cable
8 x Wall Plugs & 8 x Mounting Screws
8 x Rubber Feet
2 x 5V/2A Multi-Country Power Supply (UK, EU, US & AUS) Barrel size: 5.5/2.5mm
Lindy Manual
Features
Extends 18G HDMI & USB Signals up to 300m using Duplex LC OM3 Multi-Mode (50/125µm) Fibre
Optic Cable.
Supports HDMI resolutions up to 3840x2160@60Hz 4:4:4 8bit.
Compatible with various USB devices including USB 2.0 hubs & human interface devices (HID) such
as mice & keyboards.
HDMI audio pass-through ensures support for Dolby Atmos, DTS & up to 7.1CH.
Bi-directional IR & RS-232 pass-through allows for simple control of source and display devices.
English

Werbung

loading