Inhaltsverzeichnis
Werbung
Luftreiniger CLR 250
14
CADR-Prüfbericht
Date
Date
Datum
Date
Product
Product
Product
Produkt
Model
Model
Modell
Model
Description
Beschreibung
Description
Filter
Filter
Filter
Filter
Supplier
Lieferant
Supplier
Testing equipment
Testing equipment
Testing equipment
Prüfgeräte
1.Test conditions
1.Test conditions
1.Test conditions
1）Test chamber volume：30m
1）Test chamber volume：30m
1）Test chamber volume：30m
2. Betriebsablauf
2.Appliance operation description
2.Appliance operation description
2.Appliance operation description
Turn on "High speed function in the testing process
Turn on "High speed function in the testing process
Turn on "High speed function in the testing process
3.Test procedure
3.Test procedure
3. Prüfverfahren
3.Test procedure
1）Put the test appliance in the middle of chamber according to GB/T 18801-2015, adjust the air purifier to working status ,
1）Put the test appliance in the middle of chamber according to GB/T 18801-2015, adjust the air purifier to working status ,
1)
1）Put the test appliance in the middle of chamber according to GB/T 18801-2015, adjust the air purifier to working status ,
turn off the air purifier while checked ok .
turn off the air purifier while checked ok .
turn off the air purifier while checked ok .
2) Temperatur- und Feuchte- sowie Filtereinheit einschalten, um beide Temperatur und Feuchte jeweils im Bereich von
2）Turn on the teperature and humidity device and high efficient filtration device to control teperature and humidity
2）Turn on the teperature and humidity device and high efficient filtration device to control teperature and humidity
2）Turn on the teperature and humidity device and high efficient filtration device to control teperature and humidity
23 °C - 27 °C bzw. 40 % - 60 %RF zu regeln.
respective in the range of 23 ∼ 27 、 40%-60%RH .
respective in the range of 23 ∼ 27 、 40%-60%RH .
respective in the range of 23 ∼ 27 、 40%-60%RH .
3)
3）When particle size more than 0.3 μm concentration less than 1000 pcs /L in the test chamber ,
3）When particle size more than 0.3 μm concentration less than 1000 pcs /L in the test chamber ,
3）When particle size more than 0.3 μm concentration less than 1000 pcs /L in the test chamber ,
turn on smoke generator and pass the smoke to test chamber , turn on the fan to stir ,
turn on smoke generator and pass the smoke to test chamber , turn on the fan to stir ,
turn on smoke generator and pass the smoke to test chamber , turn on the fan to stir ,
stop to pass the smoke when particle concentration reach to rated value , the fan keep stiring in 10 minutes and turn off.
stop to pass the smoke when particle concentration reach to rated value , the fan keep stiring in 10 minutes and turn off.
4)
stop to pass the smoke when particle concentration reach to rated value , the fan keep stiring in 10 minutes and turn off.
4）The fan is in the static status , turn on laser dust monitor and air purifier to switch high speed ,negative anion setting to work .
5)
4）The fan is in the static status , turn on laser dust monitor and air purifier to switch high speed ,negative anion setting to work .
4）The fan is in the static status , turn on laser dust monitor and air purifier to switch high speed ,negative anion setting to work .
wiederholen.
5）Test the concentration of solid particles every 2 minutes ,be continuous to test no less than total decay constant data .
5）Test the concentration of solid particles every 2 minutes ,be continuous to test no less than total decay constant data .
5）Test the concentration of solid particles every 2 minutes ,be continuous to test no less than total decay constant data .
6)
6）Turn off the air purifier , test natural decay constant in the same test conditions to compare .
6）Turn off the air purifier , test natural decay constant in the same test conditions to compare .
6）Turn off the air purifier , test natural decay constant in the same test conditions to compare .
4. Prüfergebnis
4. Test result
4. Test result
4. Test result
Natural Decay Constant Kn
Natural Decay Constant Kn
Natural Decay Constant Kn
Natürliche Abklingkonstante Kn
Total Decay Constant Kt
Total Decay Constant Kt
Total Decay Constant Kt
Gesamtabklingkonstante Kt
Paticle(smoke)
Paticle(smoke)
Paticle(smoke)
CADR
CADR
CADR
CADR
5. Final result
5. Final result
5. Final result
Bestanden
Pass
Pass
Pass
Remark
Mass production is no less than 90% nominal value CADR 250 m3/h , that tolerance range from 225m3/h to 275 m3/h
Remark
Mass production is no less than 90% nominal value CADR 250 m3/h , that tolerance range from 225m3/h to 275 m3/h
Anmerkung
Remark
Mass production is no less than 90% nominal value CADR 250 m3/h , that tolerance range from 225m3/h to 275 m3/h
Der Massenwert beträgt nicht unter 90 % des Nennwerts CADR 250 m
Engineer/Date：Wu Song Xiang/2020.6.12
Engineer/Date：Wu Song Xiang/2020.6.12
Engineer/Date：Wu Song Xiang/2020.6.12
Ingenieur/Datum: Wu Song Xiang/2020-06-12
18
CADR-PRÜFBERICHT
CADR TEST REPORT
CADR TEST REPORT
CADR TEST REPORT
2020.6.12
2020.6.12
2020.6.12
12.6.2020
Air Purifier
Air Purifier
Air Purifier
CLR 250
CLR 250
CLR 250
CLR 250
HEPA H13 +Activated carbon filter +Pre
HEPA H13 +Activated carbon filter +Pre
HEPA H13 +Activated carbon filter +Pre
Description
filter
filter
Filter
Supplier
/
/
/
Y09-301 laser particle counter
Testing equipment
Y09-301 laser particle counter
Y09-301 laser particle counter
1.Test conditions
2) Umgebungstemperatur:
3
3
3
2）Environment temperature： 25.3
1）Test chamber volume：30m
2）Environment temperature： 25.3
3
2）Environment temperature： 25.3
2.Appliance operation description
Turn on "High speed function in the testing process
3.Test procedure
1）Put the test appliance in the middle of chamber according to GB/T 18801-2015, adjust the air purifier to wo
turn off the air purifier while checked ok .
2）Turn on the teperature and humidity device and high efficient filtration device to control teperature and hu
respective in the range of 23 ∼ 27 、 40%-60%RH .
3）When particle size more than 0.3 μm concentration less than 1000 pcs /L in the test chamber ,
turn on smoke generator and pass the smoke to test chamber , turn on the fan to stir ,
stop to pass the smoke when particle concentration reach to rated value , the fan keep stiring in 10 minutes
4）The fan is in the static status , turn on laser dust monitor and air purifier to switch high speed ,negative anio
5）Test the concentration of solid particles every 2 minutes ,be continuous to test no less than total decay con
6）Turn off the air purifier , test natural decay constant in the same test conditions to compare .
4. Test result
Natural Decay Constant Kn
0.00141
0.00141
0,00141
Total Decay Constant Kt
0.14134
0.14134
0,14134
μm
Paticle(smoke)
μm
0.3μm−1.0μm
μm
μm
0.3μm−1.0μm
μ
0,3
m — 1,0
3
3
m
/h
252
m
/h
3
m
/h
252
252
m
/h
3
CADR
cfm
148
cfm
cfm
148
cfm
148
5. Final result
Fail
Nicht bestanden
Fail
Fail
Remark
Engineer/Date：Wu Song Xiang/2020.6.12
Date
Client
Kunde
Client
Product
Rated voltage
Rated voltage
Nennspannung
Model
Pollutant
Pollutant
HEPA H13 +Activated carbon filter +Pre
Description
filter
High speed technique
High speed technique
High speed technique
Parameter des
parameter
Hochdrehzahlverfahrens
parameter
/
Supplier
Y09-301 laser particle counter
Test standard
Test standard
Prüfnorm
25,3 °C
3) Umgebungsfeuchte:
3
2）Environment temperature： 25.3
3）Environment humidity： 55.5%RH
3）Environment humidity： 55.5%RH
0.00141
0.00138
0.00138
0,00138
0.14134
0.14255
0.14255
0,14255
μm
0.3μm−1.0μm
0.3μm
μ
0.3μm
μ
m
0,3
3
252
m
/h
254
254
254
148
cfm
149
149
149
Pass
Reference
Reference
Reference
Mass production is no less than 90% nominal value CADR 250 m3/h , that tolerance range from
/h,der Toleranzbereich reicht von 225 m
3
Approval/Date：Mr Dou
Approval/Date：Mr Dou
Freigabe/Datum: Herr Dou
Approval/Date：Mr Dou
CADR TEST REPORT
Client
2020.6.12
Rated voltage
Air Purifier
220V 60Hz
220V 60Hz
220 V, 60 Hz
Pollutant
CLR 250
smoke
Rauch
smoke
Power（W）：
Power（W）：
Leistung (W):
Power（W）：
Rotate speed
filter
Rotate speed
Drehzahl
Rotate speed
（RPM）：
（RPM）：
(U/min):
parameter
（RPM）：
/
Noise（dB）：
Lautstärke (dB):
Noise（dB）：
Noise（dB）：
Test standard
GB/T18801-2015
GB/T18801-2015
GB/T18801-2015
GB/T18801-2015
55,5 %RF
3）Environment humidity： 55.5%RH
Rauch so lange
0.00138
0.00141
0.00141
0.00141
0,00141
0.14255
0.14134
0.14134
0.14134
0,14134
0.3μm
0.3μm−1.0μm
0.3μm−10μm
0.3μm−10μm
0.3μm−10μm
μ
m
0,3
m — 10
254
252
252
252
252
149
148
148
148
148
Bezug
Fail
/h bis 275 m
3
QM-F100-00
QM-F100-00
Client
220V 60Hz
Rated voltage
smoke
Pollutant
22W
22 W
22W
22W
High speed technique
2439
2439
2439
2439
parameter
52.3
52.3
52,3
52.3
Test standard
3）Environment humidity
0.00141
0.00138
0.14134
0.14255
0.3μm
μ
m
252
254
148
149
Reference
/h
3
Approval/Date：
QM-F100-00
- Quicklinks:
- Bedienung
- Inbetriebnahme
Quicklinks ausblenden:
Werbung
Inhaltsverzeichnis
