Specifications - Vitek VT-3478 OG Betriebsanweisung

Cd/MP3 playback does not work
CD/MP3 badly scratched/dirty
• Replace/clean CD/MP3 (see maintenance)
- Laser lens steamed up
• Wait until lens has adjusted to room
temperature
The Cd/MP3 skips tracks
- CD/MP3 damaged or dirty
• Replace or clean CD/MP3
- Program is active
• Quit Program mode(s)
USB Player
USB Player will not play.
- USB mode is not selected. Select the USB
mode.
- USB is not inserted or no track inside USB.
- Insert USB or save tracks into USB.
Environmental information
We have done our best to reduce the packaging
and make it easy to separate into 3 materials:
cardboard, paper pulp and expandable polyeth-
ylene.
Your set consists of materials which can be
recycled if disassembled by a specialized
company. Please observe the local regulations
regarding the disposal of packaging, dead bat-
teries and old equipment..

SPECIFICATIONS

Power Supply
Power Output
Dimension of Unit 30(W)x22(D)x6(H) mm
Radio Section
Freq. Range:
CD Section
Speaker
Tape Section
The manufacturer reserves the right to make
changes to the characteristics of the device
without prior notice.
The service life of the device is no less than
five years.
Guarantee
Details regarding guarantee conditions can
be obtained from the dealer from whom the
3478.indd 9
AC 230 V ~ 50 Hz
DC 2 V (.5 V x 8 UM-2
or "C" size)
2x.5 W CH 0% THD
AM 50 - 600 KHz
FM 6 - 08 MHz
Top Loading CD
3", 8 ohms
Built-in ALC
DC Bias/Magnet Erase
appliance was purchased. The bill of sale or
receipt must be produced when making any
claim under the terms of this guarantee.
This product conforms to the EMC-
Requirements as laid down by the
Council Directive 89/336/EEC and to
the Low Voltage Regulation (23/73
EEC)
9
ENGLISH
17.04.2007 14:47:58