Travel Lock - Philips HP6578 Bedienungsanleitung

EnglisH
14
4 Rinse the shaving unit, the shave, trim and style attachment and the trimming comb under a
lukewarm tap for 5 to 10 seconds while turning them a little (Fig. 37).
5 Shake the shaving unit, the shave, trim and style attachment and the trimming
comb irmly (Fig. 38).
6 Dry the shave, trim and style attachment and the trimming comb thoroughly with a tea towel
and let the shaving unit dry.
Note: Do not exert any pressure on the shaving unit to avoid damage.
7 Reattach the shaving unit to the shave, trim and style attachment. Place the shave, trim and
style attachment on the appliance and press it onto the appliance until it snaps home ('click').
Note: Make sure the shaving unit is dry before you attach it to the shave, trim and style attachment and
the shave, trim and style attachment is completely dry before you place it back onto the appliance.
8 Put the trimming comb on the shave, trim and style attachment.
Tip: Rub a drop of sewing machine oil onto the shaving unit twice a year to extend the lifetime of the
cutting element.
cleaning the precision epilator
Never immerse the precision epilator in water or any other liquid, nor rinse it under the
tap (Fig. 39).
1 Clean the precision epilator regularly by removing loose hairs with the cleaning brush. Do
not switch the appliance on while brushing (Fig. 40).
2 Clean the appliance with a dry cloth.
storage
- Put the trimming comb on the shave, trim and style attachment to prevent damage.
- Put the Smart Tweezers in their storage case after use.
- Store the appliances and the accessories in the luxury pouch.

travel lock

The epilator has an integrated travel lock which prevents the appliance from accidentally being
switched on during travel.
1 To activate the travel lock, press and hold the on/off button for 3 seconds until the speed
setting indications lash white 2 times (Fig. 41).
The epilator starts running and stops immediately when the travel lock becomes active.
,
2 To deactivate the travel lock, press and hold the on/off button for 3 seconds until the speed
setting indications lash white 2 times (Fig. 42).
Note: You can also insert the appliance plug into the inlet socket and the adapter into a wall socket to
deactivate the travel lock.
The travel lock is now deactivated and you can switch on the epilator again by pressing the
,
on/off button.
replacement
All parts of the appliances can be replaced. If you need to replace one or more parts, go to your
Philips dealer or an authorised Philips service centre.