Safety Instructions; Plugging In The Product (Image B); Using The Product - nedis BTTR050BK Kurzanleitung

Safety instructions

-
WARNING
• Ensure you have fully read and understood the instructions in this document
before you install or use the product. Keep this document for future reference.
• Only use the product as described in this document.
• Do not use the product if a part is damaged or defective. Replace a damaged
or defective product immediately.
• Do not drop the product and avoid bumping.
• This product may only be serviced by a qualified technician for maintenance to
reduce the risk of electric shock.
• Do not expose the product to water or moisture.
• Some wireless products may interfere with implantable medical devices and
other medical equipment, such as pacemakers, cochlear implants and hearing
aids. Consult the manufacturer of your medical equipment for more
information.
• Do not use the product at locations where the use of wireless devices is
prohibited due to potential interference with other electronic devices, which
may cause safety hazards.
• Do not place the product near heat sources, this can damage the product.
• Disconnect the product before cleaning.

Plugging in the product (image B)

See image B for a connection overview.
The status indicator LED A
4
mode.
Only use a 5 V USB adapter to power the product. Powering the product
4
through a USB port may produce background noises.

Using the product

1. Enable Bluetooth on the device you want to pair.
2. Keep your Bluetooth audio device within range and switched on.
Pairing time will vary depending on the device used.
4
2
A
lights up to indicate pairing is successful.
2
blinks to indicate the product is in pairing
5