nedis VTRA3420GY Handbuch

VTRA3420GY
Transmitter box (TX)
TOP
Front
Back
Connection
Step 1: Use an HDMI™ Cable to connect the HDMI IN transmitter port to a source device, e.g. a satellite receiver, CATV STB, Blu-ray player
or game console. To view the same TV programme on two TVs, also connect an HDMI™ Cable to the HDMI OUT transmitter port
and to the second (HDTV) screen.
Step 2: Use an HDMI™ Cable to connect the HDMI OUT receiver port to a screen (HDTV, projector etc.).
Step 3: Connect the IR emitter to the transmitter. Place the emitter probe in front of the IR receiver of the source device. Connect the IR
receiver to the receiver. Place the receiver probe in front of it.
Step 4: Connect a DC 5 V/1 A power adapter to the Micro USB port of the transmitter.
Step 5: Connect another DC 5 V/1 A power adapter to the Micro USB port of the receiver. Connection should now be established.
Step 6: If the screen does not show any images, rst pair the transmitter box (TX) and receiver box (RX) (press the PAIRING key of the RX
and then press the PAIRING key of the TX).
CONNECTION & OPERATION
Wireless HDTV Solution
Receiver box (RX)
TOP
Front
Back
1