Back Panel Connectors - Silvercrest LCD 24-9 Wide Bedienungsanleitung

(6) 1 POWER button: Switches the monitor on or to standby
mode.

Back Panel Connectors

Via the connector panel located on the back of the SilverCrest LCD
24-9 Wide you can connect the device to your PC. You can either
use the traditional VGA or a full-digital DVI signal connection.
Depending on the graphics adapter output port available on your
PC you can use the corresponding connection type. Furthermore,
the device features an audio input so you can listen to the sound
generated by the PC through the built-in speakers of your
SilverCrest LCD 24-9 Wide.
(7) Power switch
(8) AC IN terminal
(9) Audio input port
(10) DVI port
(11) VGA port
You may only use one of the input ports (10) or (11)
at a time: never connect the signal cables to both of
them otherwise you risk seriously damaging your
device or your PC.
Below the connectors panel next to the lower-right corner of the
housing (seen from the back) there is a hole for fixing a Kensington
lock . You can use it to secure your monitor against theft. You can
purchase a Kensington lock as an optional accessory in retail
shops.
SilverCrest LCD 24-9 Wide
107