FISCHER Profi Plus III Gebrauchsanweisung Seite 10

Operating and safety precautions
GB
Step 6
Fitting the wheel
deflection protection
Step 7
Attaching the safety flag
Step 8
Putting in the
transport box
Step 9
Putting on the
transport cover
Step 10
Attaching the trailer
coupling to the bicycle
Screw one of the two wheel deflection guards
[part no. 7] to the base frame in front of each of the
wheels. For this use screws M6x40 with washers
and nuts.
Put the two halves of the flag [part no. 10] together
using the connector and then put it in the hole
provided in the rear of the trailer.
Fold out the transport box [part no. 1] and place it in
the base frame [part no. 2].
Lay the fabric cover [part no. 3] on the transport box
and attach the cover to the base frame [part no. 2]
by means of the 4 Velcro strips.
Secure the saddle-support mounting, with the help of
the plastic shims, to the saddle pillar of your bicycle.
[Part-Nr. 12]
Now use the screw that is ready-fitted to the saddle
support mounting to attach the ball-head coupling to
the saddle support mounting.