Operation; Maintenance - REV Ritter TORCH L17-1808B Bedienungsanleitung

GB
SCOPE OF DELIVERY
Check the delivery for completeness and perfect condition.
In the case of missing parts or damage:
• do not mount the unit!
• do not put the unit into operation!
• make a complaint to the supplier.
The deliver consists of:
• Product
• Instructions
• USB charging cable
TECHNICAL DATA
• Output: 3.7W LED
• Illuminant: SMD LED´s
• Luminous flux: 400lm
• Colour temperature: 6500K
• Colour rendering index (Ra/CRI): ≥ 75
• Energy efficiency class: A++
• LED service life: 30000h
• Beam angle: 120°
• IP protection class: IP20
• Protection class: III (S5)
• Ambient temperature: -15°C – 40°C
• Dimensions W x H x D: 60 x 240 x 38mm
• Weight: 230g
• Battery: 3.7V / 1800mAh / 6.6Wh / lithium ion battery
• USB: Micro IN 5V DC / 0,8A

OPERATION

• Charging: Before (first) use, fully charge the product until the charge indicator light is green
• Charging time: 4 hours (depending on the selected USB power supply)
• Running time: 1.5 hours (400lm) / 4 hours (150lm) / 7.5 hours (80lm)
• 1x press: full power (400lm)
• 2x press: lowest power (200lm)
• 3x press: light head (80lm)
• 4x press: From
CLEANING
• Before cleaning, unplug the product from the power point or disconnect it from the mains supply!
• Allow the luminaire to cool down sufficiently!
• Clean with a dry or slightly moist, clean, lint-free cloth and a mild detergent if required. Do not use cleaners that
contain abrasives or solvents.

MAINTENANCE

• Replace any damaged protective panels immediately (S6).
• Remove all dirt from the housing or protective panel immediately, as this can lead to overheating.
• The light source of this luminaire is not replaceable; if the light source has reached the end of its service life, the
entire luminaire must be replaced.
10