Configuring The Network Settings - Sanyo VA-50LAN Installationsanleitung

2. Configuring the Network Settings

Configure the settings required for connecting the camera to the network (LAN) in the menu screen.
• For accessing the Main menu, see pages 5 - 7 on the INSTRUCTION MANUAL supplied with the camera.
• After you turn on the power, it takes approximately one minute for the "NETWORK" setting menu to appear on the "OPTION" screen.
SYNC
BLC
IRIS
WHITE BALANCE
AGC GAIN
GAMMA
SHUTTER
APERTURE
DAY/NIGHT
·OPTION
·OPTION
PRESET
MENU
(SET)
1
Select "IP ADDRESS", specify the option for
retrieving the IP address, and press the SET
button.
·IP ADDRESS
PORT
·IP ADDRESS
MAC ADDRESS
FIX : Manual configuration (Default IP address: 192.168.0.2)
AUTO : Automatic configuration (DHCP)
RThe "IP ADDRESS SETTING" screen appears.
MEMO: The "MAC ADDRESS" cannot be changed.
Confirm the setting.
4
INT
OFF
SET y
ATW
SET
NORM
0.45
R R
60
HIGH
AUTO y
SET y
OFF
END
NETWORK SETTING
SET
FIX y
00080
R
08-00-7B-81-12-20
OPTION
TITLE
PRIVACY MASK
PASSWORD
ALARM
LANGUAGE
·NETWORK
·NETWORK
PRESET
MENU
(SET)
2
Select the item to configure, and press the Select
(c) button.
ROnly the item selected appears and "x" is displayed below the
address.
• To display all the items again, press the Select (d or c) button
repeatedly until "x" disappears.
MEMO:
When you select "AUTO" for the "IP ADDRESS" setting in the
"NETWORK SETTING" screen, the IP address cannot be
changed. Confirm the setting, and advance to step
OFF
SET y
SET
SET y
SET y
R
SET y
SET y
OFF
BACK
IP ADDRESS SETTING
·IP ADDRESS
192.168.000.002
x
4
.