Sanyo VA-50LAN Installationsanleitung Seite 3

7
LAN port
CN406
CN403
8
Fixer (blue)
Retainer
Fixer (black)
1. Installing the Option Board
7
Connect the LAN cable coming out from the hole
at the bottom of the camera unit to the LAN port.
8
Using both the fixer (blue and black), fix the LAN
cable and CN406 cable to the cabinet.
Note:
• Thread the fixer (black) through the retainer before fixing the
LAN cable.
• When you use the heater (VA-50H, option board), make sure
that the LAN cable does not contact with the heater.
• Be sure to wire the cables connected to CN403 and CN406 so
that they do not touch the circuit board placed nearby.
9
Configure the network settings (See next page).
To prevent electromagnetic interference
• On the LAN cable
Be sure to attach the supplied
clamping core to the cable as
illustrated.
3