6. TROUBLESHOOTING&TRANSPORT
6.1 Troubleshooting
If you still have a problem with your appliance after checking these basic
troubleshooting steps, please contact an authorised service person or qualified
technician.
Problem
Warming Drawer does
not switch on.
Warming Drawer does
not switch on.
The drawer can not
be pushed and pulled
smoothly.
Signal light does not
light up.
6.2 Transport
If you need to transport the product, use the original product packaging and carry it using
its original case. Follow the transport signs on the packaging. Tape all independent parts to
the product to prevent damaging the product during transport.
If you do not have the original packaging, prepare a carriage box so that the appliance,
especially the external surfaces of the product, is protected against external threats.
Possible Cause
Power is switched off.
Power is switched off.
There is some debris inside to the left
and right rails.
The light is burnt out.
EN - 16
Solution
Check whether there is power supplied.
Also check that other kitchen appliances are
working.
Tighten the plug or L/N line.
Clean up the debris of the left and right rails.
Change the light.