Deuba DBHD007 Anleitung Seite 5

understand the hazards involved. Children
shall not play with the appliance. Cleaning
and user maintenance shall not be made
by children without supervision.
• Examine the blanket frequently to check
that there are no signs of wear or damage.
If any damage/wear is spotted, do not use
the blanket and seek specialist advice.
• If the supply cord of this appliance is
damaged, it must only be replaced by the
manufacturer, its service agent or similarly
qualified persons in order to avoid a
hazard.
• The appliance must be returned to the
manufacturer or his agent if the link has
ruptured.
• The appliance is not to be used by young
children over the age of three unless the
controls have been pre-set by a parent
or guardian, or unless the child has been
adequately instructed on how to operate
the controls safely.
• The appliance must not to be used by
persons insensitive to heat and other very
vulnerable persons who are unable to
react to overheating.
• Children under the age of three are not to
use this appliance due to their inability to
react to overheating.
Symbol explanation
Read the instructions for use
Do not bleach
Do not tumble dry
Do not iron
Do not dry clean
Do not inset pins
Do not use folded or rucked
Maximum washing tempera-
40
ture 40°C, mild process
Do not wash ( for models with
non-removable control)
Not to be used by very young
children (0-3 years)
0-3
Fitted Electric Blankets
The appliance should not be used on an
adjustable bed. Please blanket on mattress with
with the mains lead at the pillow end. Ensure the
controller emerges from the top side of the
the blanket and that heating elements do not
emerge under the pillow area. The four clamps
on the corners should be fixed tightly to the
mattress or the bed after you lay the electric
heating blanket to prevent the blanket from
moving or creasing. (The creased part tends to
cause high temperature which is very dangerous.)
www.Deuba24online.de
USING THE BLANKET
Connect the controller to the blanket (The
blanket has a socket attached that the
controller slots into) and ensure it is fully
connected.
Ensure there is a mains supply is nearby and
that when in use, the mains lead will not
be in a position that could cause people to
trip over it. When plugged into the mains
supply, the controller must be within easy
reach of the user.
PS7G-H/1 functional functions:
The product owns 2 controllers!
Please set at "H" preheating 30-60 minutes
before using. When using it, select the
appropriate tap position according to
human body's feeling. If you will go to
sleep or use it for a long time, please set at
"L" tap position or "1" tap position.
8 9 www.Deuba 24onl i ne.d e
Application method
The starting up state is the standby state.
The digital display of temperature is 0 and
the timing display is 0.
a. Press TEMP and display temperature at
7 tap position and the timing state is 9
hours.
b. Press TEMP and display the tap position
circulates among L1.2.3.4.5.6.7.
c. Press TIME and the timing state circulates
from 1-9 hours.
d. Press High key and the temperature tap
position is preheating which is displayed
as H. This tap position will automatically
change to L tap position 1 hour later.
Fault introductions
If the temperature is displayed as P, please
check whether the coupler of the electric
blanket has been connected firmly or
not and restart it. If the fault cannot be
removed, it means the internal connection
of the electric blanket has problems and it
needs to ask help from after-sales service.
If the temperature is displayed as E, it means
the electric blanket has internal short circuit
and has been broken.
Connecting the Controller
To remove the controller, lift the locking
tab up with your finger and pull the plug
directly out. Do not pull the controller cable
and Do Not try and pull the controller plug
out without lifting the locking tab as you will
damage the socket.
PULL
LIFT