Display Messages - Carbest 81909 Benutzerhandbuch

UK

DISPLAY MESSAGES

Connect clamps (no LED lit) – Plugged into the AC outlet without the clamps
connected to a battery.
Warning clamps reversed (Red LED lit) – Plugged into the AC outlet and the
clamps are connected backwards to a 6 V or 12 V battery. Red LED lit,
circuit (no LED lit) - Plugged into the AC outlet and two clamps connected, ditigal
screen will show »
Charging 12 V (Green LED lit) – Plugged into the AC outlet and correctly connected
to a discharged 12 V battery.
Charging 6 V(Green LED lit) – Plugged into the AC outlet and correctly connected
to a discharged 6V battery »
6 V - Plugged into the AC outlet the default output voltage is 12 V. Switch to 6 V by
mode button. When 6 V showed on screen, the output voltage is 6 V.
» « Plugged into the AC outlet and the clamps are connected correctly. Then
press mode button to select different output amperage. »
current = 1.5 A, fi ts for 6 V and 12 V battery.
» « Plugged into the AC outlet and the clamps are connected correctly to 12 V
battery. Then press mode button to select different output amperage. »
mean max. output current = 4.2 A, fi ts for 12 V battery.
» « Plugged into the AC outlet and the clamps are connected correctly to 12 V
battery. Then press mode button to select different output amperage. »
winter mode, with stable output current, suitable for charging 12 V battery in cold
weather.
» « It means fault happened when connecting ro charging. Please make sure
correct connecting and operate it in right way.
Battery type No charging
> 7.4 V, <4.5V
6 V
> 15 V, <8 V
12 V
Carbest Batterie Ladegerät | Battery Charger 81909
«
«
– % –
0 25 26 50
≤5.4 V ≤6.1 V
> ≤10.8 V > 12.2
21
short
« mean max. output
« mean
% – % % – %
51 75 75 100
≤6.7 V ≤7.1 V
≤13.5 V ≤14.5 V
«