Programmable Settings - DeLonghi KG520 Bedienungsanleitung

coffee into the filter of the coffee machine. If you don't
use all the ground coffee, it can be stored in the container,
closing the cap (A11) to avoid loosing aroma.
Always empty the ground coffee container before using the
appliance again.
7.2 Grinding directly in the filter holder
1. Prepare the coffee beans container as illustrated in steps 1
to 6 of the previous paragraph;
2. Extract the filter holder accessory's box (A6) from its
housing (fig. 7);
3. Extract the filter holder accessory (A7) (fig. 8);
4. Insert the accessory to the appliance, pushing it as far as it
goes: the corresponding light comes steady on the display
(fig. 9);
Please note
• When using the filter holder accessory, you can not
choose the number of the cups: you can only grind coffee
for 1 o 2 cups of espresso;
• When using the filter holder accessory, turn the grinding
selection regulator (A3) to number 1 or 6 of the "ESPRES-
SO" section.
Note: do not grind beyond number 6 to avoid to overfill
the filter holder.
5. Insert the filter holder to the accessory (fig. 11). It is rec-
ommended to hold in place the filter holder, as the acces-
sory is suitable for standard dimensions and do not cover
all the models;
6. Push the start button (B1) (fig. 7): to grind the 2-cups
quantity, push two times the start button within 1 second
after the grinding starts;
7. Grinding automatically stops: if you want to stop it earlier,
press the start button once again;
8. Extract the filter holder and proceed preparing espresso
coffee.
8. TIPS
• Always close the beans coffee container to maintain the
taste and aroma of the coffee beans.
• Only grind the coffee quantity for the single preparation.
• Never overfill the coffee beans container. As a rough
guide, use a tablespoon of beans per cup (e.g. 4 table-
spoons of beans for 4 cups of coffee). As you use the grind-
er, you will of course discover the optimum quantities for
your own personal taste.
• After 2 preparations consequently, wait 15 minutes be-
fore next use.
• To ensure good quality in terms of coffee freshness, al-
ways clean the appliance after each use. It is not advis-
able to grind oil beans.

9. PROGRAMMABLE SETTINGS

9.1 Programming grinding time with the filter
holder accessory (A7)
1. Insert the filter holder accessory;
2. Insert the filter holder of your coffee machine;
3. Push the
grinding starts and the cup symbol flashes fast to indicate
that the appliance is in programming mode;
4. Once reached the coffee quantity, release the
button: the appliance stops grinding and the time for 1
espresso cup is programmed.
Please note:
• To avoid excessive quantities, the max programmable
grinding time is about 7 seconds.
• It is possible to program the 1-cup quantity: when prepar-
ing the quantity for 2 cups, the appliance grinds a double
quantity.
9.2 Reset to default values
1. Switch the appliance on by pushing the ON/OFF button
(A9);
2. Extract the ground coffee container (A12) or the filter
holder accessory (A7) (if inserted);
3. Press both buttons simultaneously: the appliance reset to
the default values of display contrast and grinding time
when using the filter holder accessory;
4. Insert the ground coffee container or the filter holder ac-
cessory: the appliance is ready to use.
10. CLEANING
Danger!
Before performing any cleaning operations, the machine must
be turned off and disconnected from the mains power supply.
Never immerse the coffee machine in water.
1. Unplug from the mains.
2. Unhook the coffee beans container (A1) rotating it coun-
terclockwise and extract it. Ensure it is empty when
removing;
3. Extract the ground coffee container (A12);
4. Extract the filter holder accessory's box (A6);
5. Lift the ground coffee container's tray (A8);
6. Wash all the accessories with soapy mild water: do not
wash in dishwasher! Dry thoroughly the accessories be-
fore use.
12
button (A1) and keep it pushed: the