Herunterladen Inhalt Inhalt Diese Seite drucken

Handling Batteries; Unpacking The Appliance - Clatronic HL 3763 Bedienungsanleitung, Garantie

Keramik-heizlüfter
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 4
• Under no circumstances may the fan heater be used in rooms
with explosive gas (e.g. petrol) or while work is being carried out
with inflammable adhesives or solvents (e.g. when gluing or paint-
ing parquet, PVC etc.).
• Do not insert any objects into the fan heater.
• Ensure that a safety distance is maintained between the power
cord and the housing.
• Do not use the fan heater in the open air.
• Do not use the fan heater in close proximity to bathtubs, showers
or swimming pools.
• The fan heater should not be placed directly below a mains power
socket.
• Do not repair the appliance by yourself. Always contact an au-
thorized technician. If the supply cord is damaged, it must be re-
placed by the manufacturer, its service agent or similarly qualified
persons in order to avoid a hazard.

Handling Batteries

WARNING:
• Do not expose batteries to excessive heat such as
sunlight, fire or similar. There is a risk of explosion!
• Batteries are not toys. Keep away from children.
• Do not open batteries by force.
• Avoid contact with metal objects (rings, nails, screws,
etc.). There is a risk of short circuit!
• A short circuit could cause the battery to heat up ex-
cessively or even to catch fire, resulting in injuries.
• For your own safety, cover the battery terminals with
adhesive tape during transport.
• In case of battery leakage, make sure not to rub the
liquid into your eyes or mucous membranes. In case
of contact, wash your hands and rinse your eyes with
clear water. Seek medical attention if any discomfort
persists.
CAUTION:
Batteries can leak and lose battery acid. If the remote
control is not used for a long period of time, remove the
battery.
42
HL3763_IM_new2

Unpacking the Appliance

1. Remove the appliance from its packaging.
2. Remove all packaging material such as foils, padding,
cable holders and cardboard.
3. Fully unwind the cable.
NOTE:
There might be dust and production residue present on
the appliance. We recommend cleaning the appliance as
described under "Cleaning".
Overview of the Components
1 Handle
2 Grille for heating elements
3 Stand
4 Safety switch
5 Display
6 MODE button (select temperature setting)
7
button (increase temperature)
8
button (decrease temperature)
9 Indicator lamps
10
button (switching the appliance on / off)
11
button (switch display on / off)
12
button (time-delayed switch-off)
13
button (switch oscillation on / off)
30.07.20

Quicklinks ausblenden:

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis