Herunterladen Diese Seite drucken

Schartec MFE R5114 Programmierung Seite 2

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

SCHARTEC
a trademark of bau-shop-24 GmbH
Fritz-Müller-Strasse 119
73730 Esslingen
Germany
WEEE Reg. Nr.: DE90317979
BattG Reg. Nr.: 21008776
Safety Instructions
Please read this manual before installation and use.
To prevent accidental operation of door drive, not attempt to code in the remote control while the door drive is moving / in use.
The signal may be interfered with by other radio devices in the environment (e.g. babyphones or the like that have the same frequency).
Therefore, this product must not be used with high-risk devices (e.g. cranes or the like).
Keep remote controls out of reach of children.
The remote control should only be used when in visual sight of the door / gate.
Remote controls should only be used by persons who have been properly instructed in it's use.
Protect the remote and receiver from rain, snow, direct sunlight, as well as dust.
The receiver is intended for dry rooms only.
Interferences may occur if the receiver is placed too close to the door operator control board.
Function of the radio receiver may be impaired if the connection cables are too long.
Technical Data
• Power Supply: 12-24 V AC/DC
• Frequency: 433.92 MHz Rolling-Code
• Static Working Current: ≤ 7mA
• Operating Temperature: -20°C - +60°C
• Contact Current: ≤ 10mA
• Max Memory: 500 Codes
• Channels: 2
• Article number: ST201002
• Model number: Schartec MFE R5114
Connections
• 12-24 V AC/DC = Power Supply (left + / right -)
• NO1 + COM1 = Output 1 (Channel 1)
• NO2 + COM2 = Output 2 (Channel 2) (Not used with 1 Button Remote)
Programming
1. Coding in the remote control: Press the "Learning Button", the LED lights up red. Press the remote button once, the LED turns green. Press it again
immediately after and the LED blinks red 6 times then goes back to green. This means the learning process is finished.
2. Deleting stored remotes: Press and hold the "Learning Button", the LED lights up red. Keep the button held and after approx. 8 seconds, the LED
turns green. You can now release the "Learning Button". The deletion process is now complete.
Schartec hereby declares that the radio equipment type Schartec MFE R5114 complies with Directive 2014/53/EU. The full text of the EU Declaration of
As a dealer for the distribution of electronic, battery-operated devices, we are obliged by law to inform our customers about the following:
Electrical and electronic devices, as well as batteries, must not be disposed of as household or residual waste, but must be delivered in the appropriate
acceptance and collection points. The complete version of the battery law can be found here: http://www.gesetze-im-internet.de/battg/index.html
Schartec External Wireless Receiver
Simplified EU Declaration of Conformity (CE)
Conformity can be requested at the following Internet address: www.schartec.de
MFE R5114

Werbung

loading