Rebelcell 12V35 AV Bedienungsanleitung Seite 5

Battery charger (when using a Rebelcell battery charger)
read the warnings on the battery charger sticker before use and follow the instructions!
Step 1 connect the battery charger by connecting the red (+) and black (-) M8 tongue
connectors of the battery charger to the red (+) and black (-) M8 screw terminals of
the battery.
Step 2 connect the power cord to the Ac-outlet.
Step 3 set the power switch to "on" (if available) and the charging process will start.
The LED's on the charger indicate the charging status. Unplug the power cord before dis-
connecting the charging cables from the battery. Review the technical speciications for more
information on indicative charging times for your battery.
BMS and safety
the BMS protects your battery and contributes to a long service life. Functions of the BMS are
protection against deep discharge, overcharge, too high or too low temperatures, high currents
and cell balancing. When certain safety thresholds are exceeded, the battery will shutdown as a
precaution and will turn itself on when the battery operates within speciication. If this does not
happen automatically you need to disconnect your equipment in order to reset the battery.
After a few minutes you can reconnect your equipment. The activation of the BMS may seem
like a failure, but it is not. If it occurs repeatedly this can indicate a malfunction of a component
in your electrical system or overheating of the battery. If this happens contact your electrician
to check your electrical system.
warranty
Your battery has a standard 2-year warranty from date of purchase. Other components
(e.g. charger, accessories) carry a 1-year warranty. Refer to our general terms and conditions for
detailed warranty conditions. Please retain and store your purchase receipt, as it is required for
warranty claims.