Werbung
B) M.2 SSD: How to Install the M.2 SSD
M.2 SSD: Wie Sie die M.2 SSD installieren / SSD M.2: Comment l'installer / M.2 SSD: Cómo instalar SSD M.2 / SSD M.2: Como instalar o SSD M.2 / M.2 SSD: Come installare un' unità M.2 SSD
Накопитель M.2 SSD: Порядок установки накопителя M.2 SSD / M.2 SSD: Jak zainstalować M.2 SSD / M.2 SSD: M.2 SSD nasıl kurulum yapılır / 如何安裝M.2 SSD / 如何安装M.2 SSD
M.2 SSD：M.2 SSDの取り付け方法 / M.2 SSD : M.2방식 SSD을 설치하는 방법
1
Carefully insert the M.2 SSD
into slot B.
小心的安裝M.2 SSD於B插槽。
C) Memory Installation: DDR3 Low Voltage (1.35v)
Arbeitsspeicher Installation DDR3 Low Voltage (1,35 V) / Installation de la mémoire DDR3 en basse tension (1.35v) / Instalación de la Memoria DDR3 de bajo voltaje (1.35v)
Instalação da memória DDR3 de Baixa Voltagem (1.35V) / Installazione Memoria DDR3 Low Voltage (1,35V) / Установка модулей ОЗУ DDR3 Low Voltage (1,35 В)
Instalacja pamięci DDR3 nisko napięciowych (1.35V) / Bellek Yerleştirilmesi DDR3 Düşük Voltaj (1.35v)
安裝記憶體 / 安装内存 / メモリの増設方法 DDR3L(1.35v) / 메모리 설치 DDR3 Low Voltage (1.35v)
1
2
Carefully insert SO-DIMM memory modules.
Push down until the modules click into
小心並由下至上安裝SO-DIMM記憶體於記
place.
當記憶體固定於插槽後，再輕輕下壓
憶體插槽。
至定點。
D) BRIX s Support Additional SATA 6Gbps HDD: How to Install 2.5" HDD
BRIX s Unterstützt Zusätzliche SATA 6Gbps HDD: So installieren Sie die 2,5 "Festplatte / Le BRIX s supporte un disque dur SATA 6Gbps additionel: Comment l'installer
Soporte adicional HDD 6Gbps SATA para BRIXs: Cómo instalar HDD 2.5" / BRIX s Suporte adicional para HDD SATA 6Gbps: Como instalar HDD 2.5"
BRIX Supporta un' ulteriore porta SATA 6Gbps per HardDisk: Come installare un HDD da 2,5" / BRIX допускает установку дополнительного жесткого SATA-диска (6 Гбит/с): Порядок установки 2,5-дюйм жесткого диска
BRIX wspiera dodatkowy dysk SATA 6Gbps HDD: Jak zainstalować 2.5" HDD / BRIX, extra 6Gbps HDD destekler: 2.5'' HDD nasıl kurulum yapılır / BRIX s支援額外的SATA 6Gbps硬碟：如何安裝2.5" HDD
BRIX s支援额外的SATA 6Gbps硬盘： 如何安装2.5" HDD / BRIXs SATA 6Gbp ハードディスク(HDD)増設：2.5インチ HDDの取り付け方法 / BRIX s는 추가 SATA 6Gbps을 지원합니다. HDD : 2.5" HDD를 설치하는 방법
1
Unscrew and remove the bottom
panel, disconnecting the SATA
cable.
移除BRIX s底蓋並取下主機板上
的SATA線。
3
Install the HDD in the cage using the
screws provided and connect the SATA
cable to the HDD.
將硬碟插入硬碟插槽並使用包裝隨
附的4顆螺絲固定硬碟，將SATA線另
一端連接於硬碟連接埠。
4
Screw the HDD cage in place
in the bottom panel.
將安裝好硬碟的硬碟插槽固
定回BRIX s底蓋。
2
The M.2 SSD is secured in place with a
small screw in the left corner.
使用包裝隨附的螺絲固定M.2 SSD。
3
4
Carefully insert SO-DIMM memory modules.
Push down until the modules click into
安裝下層記憶體後，重覆前述動作安裝上層
place.
當記憶體固定於插槽後，再輕輕下壓
記憶體。
至定點。
2
Flip the bottom panel and unscrew
the four screws holding the HDD
cage in place.
翻轉底蓋並鬆開固定硬碟插槽的
4顆螺絲。
5
Connect the SATA cable to the
motherboard and reinstall the bottom
panel.
安裝主機板端的SATA線，裝回BRIX s
底蓋。
VESA Bracket
VESA-Halterung / Support VESA / soporte VESA / Suporte VESA / Staffa VESA / Крепление VESA / Uchwyt VESA / VESA Desteği / VESA支架 / VESA支架 / VESA対応ブラケット / VESA 브래킷
1
2
Attach the screws provided on the underside of the
Attach the VESA mounting plate to the rear of a compatible
BRIX or BRIX s.
display using the screws provided.
安裝隨附的VESA支撐架螺絲於BRIX底部。
安裝隨附的VESA支撐架於支援VESA支撐架的電腦螢幕或
電視機後背。
USB Power On Function: Allows Device Power-on Via USB. Useful When Mounted Behind a Display or TV
USB Power On Funktion / Fonction Démarrage par USB / Función USB Power On
Função USB Power On / Funzione USB Power On / Функция USB Power On
Opcja USB Power On / USB Güç Açık Fonksiyonu / USB埠啟動功能
USB接口启动功能 / USB機器からの電源ON機能 / USB 포트를 이용한 전원 켜기
1
2
Press "Del" during device start up to
Select "Chipset" from the menu.
在BIOS主選單選取"Chipset"。
enter BIOS.
開機後按啟Del鍵進入BIOS設定畫面。
System Requirements
Note: 'USB Power On' functionality in Windows 8 and above requires an additional Windows patch. This is provided
on GIGABYTE's official website labeled 'USB Power-On Patch'. Your GIGABYTE BRIX can be powered on via a connected
- Win 7
- Win 8.x or above version (Install utility required)
USB device such as a keyboard or mouse, offering greater convenience when mounted behind a display or monitor.
系統需求
注意：在Windows 8或以上的版本環境下需要額外的應用程式來啟動"USB Power On"功能。你可以透過技嘉官網
的產品支援與更新下載"USB Power-On Patch"來執行。USB Power On提供了方便的開機功能，使用者可以透過連接
- Windows 8或以上的版本 （需安裝額外的應用程式）
- Windows 7
到BRIX上的USB裝置啟動BRIX；讓安裝於顯示器後方的BRIX更方便使用。
Multi-BIOS Allows you to choose BIOS mode according to the OS of your choice
Hier können Sie den BIOS-Modus entsprechend dem Betriebssystem Ihrer Wahl wählen / Permet de choisir le mode BIOS selon le système d'exploitation de votre choix
Le permite elegir el modo de BIOS de acuerdo con el sistema operativo de su elección / Permite escolher o modo de BIOS conforme o SO de sua preferência
Ti consente di selezionare la modalità BIOS in accordo con la tua scelta del sistema Operativo / Мульти-BIOS: Позволяет выбрать режим BIOS в соответствии с ОС, исходя из предпочтений пользователя
Çoklu-BIOS: isteğiniz doğrultusunda BIOS modunu seçmenize olanak sağlar / お好みのOSに応じてBIOSモードを選択できます / 멀티 BIOS: 선택한 OS에 따라서 바이오스 모드 선택을 허용
1
2
Press "Del" during device start up to enter BIOS.
Select OS type to "Windows 8.x/ Windows 10" or "Windows 7" from "Advanced" on menu bar.
開機後按啟Del鍵進入BIOS設定畫面。
在BIOS主選單選取"OS type"後，選擇要安裝的OS類型。
Note: You have to select the OS mode in the BIOS before installing any OS on your BRIX.
注意：需在BIOS選單中先選擇所要使用的OS模式，你的BRIX才能安裝OS。
Note: Due to a lack of legacy EHCI controller support from Intel on the 6th generation CPU, the USB 3.0 ports of the BRIX unit are not compatible with USB 2.0 devices. To help you
install your operating system, GIGABYTE provides a tool which is preloaded on the driver CD called "Windows Image Tool". This tool helps you to create an installation USB dongle
which includes the driver necessary for backward compatibility. To install Windows 7 using this tool, please follow these steps :
- Plug a USB 3.0 drive (4GB minimum) into another computer.
- Launch the "Windows Image Tool".
- Add the Windows 7 installation files and USB 3.0 drivers to your USB drive.
- Plug the USB drive to your BRIX unit and follow the steps to install the OS.
After the installation of the OS and drivers, the USB 3.0 ports will be backward compatible with USB 2.0 devices.
3
The BRIX or BRIX s can now be mounted by sliding the
device into place.
將已安裝VESA支撐架螺絲的BRIX插入VESA支撐架的滑軌
孔 ，向下壓至定位點後即可固定。
3
4
Manually configure "Erp Low Power State
Press F4 to Save and Exit.
按啟F4存儲設定並離開BIOS選單重新
Mode" settings to "Disabled".
進入Chipset的Erp Low Power State
開機。
Mode選項，手動控制將其"Disabled"。
UEFI system
Win 8.x / Win 10
Legacy system
Win 7
Werbung
