Procedures For Motors - Milnor 36021 Bedienungsanleitung

Chapter 3. Routine Maintenance
If you obey these precautions, use the Manual mode to operate the machine at wash speed. Then
add grease at the grease plate.

Procedures for Motors

3.1.4.3.
grease maintenance is necessary. If a motor on your machine has grease fittings, it is necessary to
add grease. But the interval is usually longer than for other maintenance.
grease intervals and quantities for motors with specified frame sizes and speeds. You get this data
from the motor nameplate. Use
machine.
PELLERIN MILNOR CORPORATION
—If a motor on your machine does not have grease fittings, no
Table 6 in Section 3.1.2
26
Table 10
to record the data for the motors on your
gives motor