Safety Instructions; Product Description - Rebel MIE-RB-15C Handbuch

SAFETY INSTRUCTIONS

In order to avoid electric shock or other injuries,
follow the safety instructions below:
1. Before using the device, inspect the case for any
mechanical damage. If the case has cracks or is
missing any part, do not use the device.
2. Do not input voltages higher than said in the
specification.
3. Do not use the device in temperatures
exceeding the range in specification, in high
humidity, and near explosives and flammables.
4. During measurement, hold the device and the
test lead by plastic parts.
5. Disassembly of the device by user is forbidden.
The device has no user serviceable parts inside.
In case of malfunction, send the device to
manufacturers service center.
6. Do not tamper with devices internal circuits. This
may lead
damaging the device.
7. Clean this device with soft, slightly damp cloth.
Do not use any abrasive agents.

PRODUCT DESCRIPTION

1. Measurement probe
2. Alternator state indicators
3. Battery state indicators
4. Battery ready to charge indicator
EN
to measurement
6
decrease or
1
2
3
4