Programming Panel (Programming Buttons) - Automatismos Pujol STC 600N Handbuch

STC
Nombre del Producto modelo
Programming buttons
1 K1 programming, confirmation, receiver shut down
3 K3 Programming for opening
4 K4 Programming for closing
PROGRAMMING PANEL
Transmitters
Inner and outer connections
5 Motor connection
6 Transformer connection
7 Power supply connector, beacon and transformer
8 Control panel connector
9 Connection for push-button, photocell, accessory equipment power supply
10 Beacon connection, pedestrian door security contact
Progamming Confirmation
programming.
Opening programming.
Force increase programming.
Photocell switch on programming
Automatic closing programming.
Closing programming.
Force reduction programming.
Photocell switch off programming.
6 5
7
Transmitters programming LED.
8
10 9
36